20 Most Recent 2000 Dodge Intrepid Questions & Answers


Only check the level when it has been driven and warm. And while it is still running. Now, for the slow engagement, It may be draining fluid back into the pan, from the torque converter. Let it idle a little while before trying to drive it. That will fill the torque converter back up, and will drive right away. Takes about 2 minutes of idle time to fill the torque converter. Now, drive it and then, while it is still running, in park, check the fluid level in the transmission. It very likely could be low and could also be the slow engagement cause.

2000 Dodge... | Answered on Jan 15, 2018


plugs in modern engine last the life of the motor
you will not get smoke from a rear main as it will be a full on oil leak as for the head gasket comment
take it to an accredited service center and have a compression test done
from your statement , It would appear that you are not getting the correct advice

2000 Dodge... | Answered on Dec 22, 2017


I would check your fuse board for a loose fuse or wire to it from the battery as sometimes vibration loosens terminals eric

2000 Dodge... | Answered on Dec 12, 2017


Hello,

Google this: how to change shifter cable on a 2000 dodge intrepid - under videos.

I hope this helps

2000 Dodge... | Answered on Oct 29, 2017


Need more info such as engine size.

2000 Dodge... | Answered on Oct 12, 2017


Hey Ninja,,, a bad thermostat will not cause the belt to break,,. BUT a locked up A/C compressor will, anything that is locked up or not freely working will cause the belt to break.. MAYBE the water pump is locked up and you are forcing it to try to turn.. this will give you the symptoms you describe..

2000 Dodge... | Answered on Jul 12, 2017


I had a similar problem with my 2003 intrepid. The problem turned out to be the control panel. I went to a salvage yard and got one.

2000 Dodge... | Answered on Jun 20, 2017


the fact that after you changed the part from the junk yard it blew warm air indicates that the heater core is not the problem
could be the heater control is not fully opening or the junk yard replacement part is faulty

2000 Dodge... | Answered on Jun 17, 2017


of course it would . they run a closed system to cool properly

2000 Dodge... | Answered on May 26, 2017


How many miles since the failure to pass ?

2000 Dodge... | Answered on Apr 07, 2017


That's got nothing to do w the O2 sensor. The float on the gas tank is a good start w the gauge issue .

2000 Dodge... | Answered on Apr 02, 2017


In the junction block, check 20A FUSE 18, 10A FUSE 4, and 10A FUSE 19.
The hood release probably was damaged as the mechanic fumbled with opening or closing

2000 Dodge... | Answered on Mar 18, 2017

Not finding what you are looking for?
2000 Dodge Intrepid Logo

1,163 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Dodge Experts

Marvin
Marvin

Level 3 Expert

85216 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Intrepid Dodge

  • Intrepid Dodge

Most Popular Question

2000 dodge internal fuse chart

  • Cars & Trucks
Loading...