20 Most Recent 2001 Dodge Ram 3500 Truck Questions & Answers

2001 dodge ram 3500 no dashboard, running lights, backup or tail lights

Check the headlight switch. The power goes from the fuse to the headlight switch and then to the dash and running lights.

2001 Dodge Ram... | Answered on Jul 26, 2019

1 Answer

My 2001 dodge ram 3500 turbo diesel died out while driving

Check the fuel pressure

2001 Dodge Ram... | Answered on Jul 10, 2019

2 Answers

What is the engine power of the Dodge RAM 3500 from the year 2001?

HD 5.9L (360) SMPI V8 "MAGNUM"
Horsepower: 245 @ 4000 RPM
Torque: 345 @ 3200

5.9L (359) HO I6 CUMMINS TURBO DIESEL
Horsepower: 245 @ 2700 RPM
Torque: 505 @ 1600 - 2700 RPM

2001 Dodge Ram... | Answered on Feb 11, 2019

0 Answers

I need to know what size rear axle nut socket I need for a 2001 Dodge Ram 3500 4WD with a Dana 80. I tried a 2 1/2 six point too small and a 2 5/8 wouldn't fit inside the hub. Must be metric.

2001 Dodge Ram... | Posted on May 30, 2018 | Be the first to answer

1 Answer

Have 2001 dodge ram 3500 4wd ext cab diesel. I

Loss of power to the plugs

2001 Dodge Ram... | Answered on Jan 17, 2018

0 Answers

What is the torque for the rear axle spindle nut and lug nut torque for a 2001 dodge ram 3500

2001 Dodge Ram... | Posted on Dec 22, 2017 | Be the first to answer

0 Answers

In gear but acts like in neutral. Will engage but slips going downhill.

2001 Dodge Ram... | Posted on Apr 12, 2017 | Be the first to answer

0 Answers

2001 Dodge 3500 Diesel new tank fuel pump stopped running

2001 Dodge Ram... | Posted on Apr 03, 2017 | Be the first to answer

1 Answer

Injectors and spark plugs do not have pulse

CHECK BOTH THE OVERHEAD CAMSHAFT SENSOR AND YOUR BOTTOM CRANKSHAFT SENSOR, THESE TWO SENSORS WHERE PUT IN TO REPLACE YOUR DISTRIBUTOR, THE ARE BOTH ELTROMAGNETIC AND SEND PULSES TO THE BRAIN AND KEEPS YOUR CAR IN TIME AND IT ALSO SENDS PULSES THRU YOUR COIL PACKS

2001 Dodge Ram... | Answered on Jun 21, 2016

2 Answers

New clutch not disengaging

When I do clutch jobs. I replace the clutch package(comes with the slave) and the master cylinder also. Have the flywheel turned or replaced. Just a note. The clutch plate can be installed backwards. No matter how many times you bleed it, It won't work.

2001 Dodge Ram... | Answered on Jun 01, 2016

1 Answer

Just replaced clutch and flywheel on 01 5.9 L diesel. Truck starts but no clutch. What did I do wrong?

Did you pressure bleed the clutch?? Does the pedal go to the floor or what?

2001 Dodge Ram... | Answered on May 31, 2016

1 Answer

Replaced lift pump 4 mo. ago engine r.p.m. will not go past about 1800 rpm

Most likely the injection pump, either the drive or timing module connections or the mechanical governor sweep.

2001 Dodge Ram... | Answered on Mar 05, 2016

3 Answers

Replaced heater core stop turn and hazard lights all stopped working!! ??? what should i look at fuses all good!

You hooked something up wrong or not at all ,it shouldn't have blown a fuse ,did you disconnect the battery before doing the heater core . Find wiring diagrams an check power an grounds to those circuits . Go to YouTube an check out some basic electrical trouble shooting videos , an voltage drop testing videos.Basic Electrical fundamentals an so on. They worked before right ?

2001 Dodge Ram... | Answered on Dec 02, 2015

1 Answer

Engine high rev's

Check for a vacuum leak!

2001 Dodge Ram... | Answered on Nov 29, 2014

1 Answer

I'm looking for a serpentine belt diagram for

Raise the hood look you will see a diagram with the info you need on it. Will be the body part that goes from one side to the other side of front of vehicle in front of the radiator. :-)

2001 Dodge Ram... | Answered on Oct 16, 2014

1 Answer