20 Most Recent 2002 Dodge Ram 3500 Truck Questions & Answers


check the oil and transmission fluid levels also smell and look at the trans fluid if smells burnt and looks brownish you can change filter and fluid and hope no internal damage ---also to much oil and fluid is just as bad as low --- have the codes read most auto stores offer this service for free

2002 Dodge Ram... | Answered on Aug 22, 2017


YES SOUNDS LIKE YOU DIDNT TIGHTEN DOWN THE SILINOID WIRE TIGHT ENOUGH ON THE STARTER. THIS WIRE IS ALSO YOUR IGNITION WIRE IT KEEPS THE POWER GOING THRU THE LOOP SO CHECK YOUR HOT WIRE ON STARTER SOMETIMES WE THINK WE TIGHTEN THEM DOWN BUT WE GET EASILY DISSTRACTED

2002 Dodge Ram... | Answered on Jun 21, 2016


IT MEANS THE ENGINE IS COLD FOR TO LONG SO ITS A TEMPERATURE SENSOR. YOU NEED TO CHANGE THE THERMASTAT IN YOUR CAR. THE GAGE IS WORKING OR YOU WOULD NOT GET A 1287 CODE SO DONT MESS WITH THE GAUGE, JUST GET A NEW THERMASTAT. AND UNHOOK YOUR NEGATIVE CABLE ON THE BATTERY BEFOR YOU REPLACE THIS AND TURN IGNITION TO START POSITION AND DO A TEN SECOND COUT, THEN REPLACE THE THERMASTAT , THEN HOOK YOUR NEGATIVE CABLE BACK UP THIS CLEARS THE CODES IN YOUR CAR SO IT WILL READ NEW CODES AS THINGS GO OUT. ALWAYS CLEAR YOUR CODES BEFOR DOING THE REPAIR AND DONT HOOK UP THE BATTERY UNTIL YOUR DONE WORKING ON IT,

2002 Dodge Ram... | Answered on Jun 21, 2016


I do not think it has anything to do with the door. I think you should put a scan tool on it and see what you pull for codes.
Please let me know.

2002 Dodge Ram... | Answered on Jan 26, 2016


Hi Francis:
I'm assuming you've checked the bulbs and confirmed the grounds and sockets.
I'd check the transmission to see if there is a wire coming from it.
that should be the reverse lights switch. Check with a continuity meter to make sure it is working. Reverse shift position - continuity. Any other position, switch should be open.
Replace if not working.
If it is working you'll need to explore more.
Please reply as a comment to this post if you need more info.
Cheers.

2002 Dodge Ram... | Answered on Dec 03, 2015


it should be located in the under hood power relay box.

2002 Dodge Ram... | Answered on Sep 11, 2015


Check the connections to the alternator.

2002 Dodge Ram... | Answered on Mar 28, 2015


go on line to the following sites ask about the error message.

www.ask.com
www.info.com
www.wiki.org
www.about.com

type the following : ecu error code 121.p code 1693 mean

thank you rod

2002 Dodge Ram... | Answered on Mar 04, 2015


call the dealer for the code solutions

2002 Dodge Ram... | Answered on Feb 13, 2015


Your blower resistor is bad.

2002 Dodge Ram... | Answered on Jan 29, 2015


did the cable break , you can open it with a scrwdriver put the lever over it has two lock mech on it ,

2002 Dodge Ram... | Answered on Dec 03, 2014


May be possible to remove grill to gain access.

2002 Dodge Ram... | Answered on Dec 02, 2014


you probably pulled a wire loose while replacing the injector pump. there is also a main set of breakers in a box under the hood.

2002 Dodge Ram... | Answered on Nov 17, 2014


Vacuum lines do not actually go into the transfer case, they go to the 4x4 actuator and there is a vent hose at the top...that is about it.

2002 Dodge Ram... | Answered on Aug 01, 2014

Not finding what you are looking for?
Cars & Trucks Logo

Popular Tags

194 questions posted

Ask a Question

Usually answered in minutes!

Top Dodge Experts

Marvin
Marvin

Level 3 Expert

85216 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Ram 3500 Dodge

  • Ram 3500 Dodge

Most Popular Question

ecu error code 121 p code 1693

  • Cars & Trucks
Loading...