20 Most Recent 2005 Dodge Ram 3500 Questions & Answers


Sounds like the flexible brake line is changing the pressure in the brakes, it probably has a missing clamp to hold it in place. Often times a spring is used.

2005 Dodge Ram... | Answered on Dec 17, 2017


Governor pressure controls the 1st and 2nd shifts. After that is the 3 and 4 solenoids. you would need to look at the pressure when driving(takes a scanner). pressure is 20 to 30 PSI from 1st to 2nd, depends on acceleration. After that the pressure will jump to 100+ psi. Did you replace the governor solenoid and sensor? They are on the passenger side of the transmission and sit in a block that detaches from the valve body.

2005 Dodge Ram... | Answered on Sep 29, 2016


Do you have 4 wheel drive ? If you do you "could " have a problem with the transfer case. The noise you describe is indicative of transfer case issues.

2005 Dodge Ram... | Answered on Dec 02, 2015


You will find step by step instructions on this software .. Download from here: Cummins Signature ISX and QSX15 Factory Manual Repair Servic Download...

2005 Dodge Ram... | Answered on Apr 05, 2015


if it worked before probably wrong bulb check the bottom of the bulb compare to the old one or the socket is it one or two prong or one or two filaments in bulb.

2005 Dodge Ram... | Answered on Mar 07, 2015


This is most likely due to worn brakes that need replaced. If not it could be the ABS sensors.

2005 Dodge Ram... | Answered on Sep 25, 2014


You will have to use a bearing puller or heat it with a torch. Be careful when heating as there will be grease on the spindle which could ignite.

2005 Dodge Ram... | Answered on Aug 28, 2014


the seat coverig will have to be removed to replace tgis parrt yoiu have.
on the bottom of eackj c
overing are hog rings the would be widen so removal witll be simlified

2005 Dodge Ram... | Answered on Aug 08, 2014


Dodges usually have dash bezels that cover the climate control.and.stereo features

2005 Dodge Ram... | Answered on Jul 23, 2014


Lightening that close probably fried everything. ECM,BCM,injectors,coils,ignition control module and more. I did an 05 grand prix that was welded on the exhaust. They hooked the ground to the on the body instead of the exhaust and fried everything in the car. The only way to check is to take the modules apart and look for burnt PC boards. Hand held computers wont read them, because they are burnt.

2005 Dodge Ram... | Answered on Jun 19, 2014


Check your connections and wiring and relays for that circuit

2005 Dodge Ram... | Answered on Mar 19, 2014


the coolant temp sensor should be tied into both the gauge and the clutch . the sensor tells the fan clutch to come on if the vehicle is going above the normal operating temp. also check the wiring leading to the sensor and the clutch for broken or frayed .

2005 Dodge Ram... | Answered on Mar 01, 2014

Not finding what you are looking for?
Cars & Trucks Logo

220 questions posted

Ask a Question

Usually answered in minutes!

Top Dodge Experts

Marvin
Marvin

Level 3 Expert

85223 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Ram 3500 Dodge

  • Ram 3500 Dodge

Most Popular Question

dodge ram 3500 skips from 1st 3rd gear

  • Cars & Trucks
Loading...