20 Most Recent 1996 Dodge Neon - Page 6 Questions & Answers

0helpful
2answers

05 dodge neon barometric pressure too low car wil not start

getta haynes manual at partsplace--has complete details
5/22/2012 6:13:36 AM • 1996 Dodge Neon • Answered on May 22, 2012
0answers
0helpful
2answers

Change a water pump on a dodge neon

i need a diagrm for the cooling system on a 1999 dodge neon

5/9/2012 4:37:03 AM • 1996 Dodge Neon • Answered on May 09, 2012
0answers
0helpful
1answer

Connected code reader to my 1996 neon and got a P0140 downstream O2 stays at .47, also have a P0300 random misfire. I have switch PCMs, installed new wires, plugs, crank sensor, cam sensor, fuel press

did you have the ignition coil checked? the coils on the chryslers like to go bad also causing the random p0300 code,
4/6/2012 3:17:42 PM • 1996 Dodge Neon • Answered on Apr 06, 2012
0helpful
1answer

1996 dodge neon grinding sound

Does is sound like a loud humming / buzzing sound ? If so it could be the bearing. Can you describe the sound in more detail? Is it constant ? Does it change if the car is turning to the left or right ?
3/19/2012 12:53:34 PM • 1996 Dodge Neon • Answered on Mar 19, 2012
0answers
0helpful
1answer

ROUBLE CODE P1294

The code P1294 means that the computer is setting a target for the engine to idle at and the engine cannot do it therefore setting the DTC. Start by checking or replacing the spark plugs and wires. Try to use Autolite spark plugs. Also remove the idler motor from the throttle body and spray it out with carb cleaner. Also spray out the passages in the throttle body that the idle motor use. If that does not fix it you could have another problem like a bad idle motor or something relating to that circuit.
2/26/2012 6:10:18 PM • 1996 Dodge Neon • Answered on Feb 26, 2012
0helpful
1answer

Service engine light is on how to reset it

As far as I know, on that year vehicle, the only way to clear the service light is to use an OBD-II Scanner. You should be able to rent one from your local auto parts store, purchase one, or bring it to a mechanic or dealer. I always rent one, plug it into my vehicle and check for codes. The code will tell you what turned the light on to begin with. This must be fixed before you can reset the light. Once the repair is made, there is an option on the scanner to clear the service light. You can just reset the light without repairs but, be ready for the light to come on again.
2/26/2012 5:51:03 PM • 1996 Dodge Neon • Answered on Feb 26, 2012
0helpful
1answer

I need a chart for the water pump

For water pump replacement i suggest you to check the help link provided below.

click the link below :----

Water pump replacing procedure for all vehicles?

http://technoanswers.blogspot.com/2011/11/water-pump-replacing-procedure-for-all.html ---------

HOW TO REPLACE A WATER PUMP

http://schematicsdiagram.blogspot.com/2011/07/how-to-replace-water-pump.html

------------------ How to route Water Pump Belt for 1992 Oldsmobile ?

http://carbeltrouting.blogspot.com/2011/12/how-to-route-water-pump-belt-for-1992.html

--------- How to replace Water Pump on Car ?

http://repairhelpcenter.blogspot.com/2011/11/how-to-replace-water-pump-on-acura-car.html

--------- How to Remove Water Pump?

http://technoanswers.blogspot.com/2011/12/how-to-remove-water-pump-on-toyota.html

------- Where is Water Pump located ?

http://technoanswers.blogspot.com/2011/12/where-is-water-pump-located-on-toyota.html

-----------

This will help. Thanks.

2/25/2012 9:39:19 PM • 1996 Dodge Neon • Answered on Feb 25, 2012
0helpful
2answers

Replaced battery now car does not start. car stsrted before replacing battery

No click, nothing? Double checked all connections at battery? Did you locate start relay & check for power to it? Tried moving shifter through gears while trying to start?
2/18/2012 6:07:37 PM • 1996 Dodge Neon • Answered on Feb 18, 2012
0helpful
1answer

Show me where's the crank sensor on 96 dodge neon

It is near the oil filter just above it.2_17_2012_11_30_09_pm.jpg
2/17/2012 11:30:18 PM • 1996 Dodge Neon • Answered on Feb 17, 2012
0helpful
1answer

Gauges only work when engine is cool

For gauges not working on dodge problem,troubleshooting. Click the link below :----http://technoanswers.blogspot.in/2012/02/dodge-neon-gauges-not-working.html ---------This will help.Thanks.
2/9/2012 10:08:56 PM • 1996 Dodge Neon • Answered on Feb 09, 2012
0helpful
1answer

No power going to starter

fuse number 11 in the fuse block. it should be a 30 amp fuse.i will need to know if you have an automatic or manual trans to help you further if needed. I’m happy to assist further over the phone at https://www.6ya.com/expert/jeremy_d728a59f986299fa
2/3/2012 7:06:25 PM • 1996 Dodge Neon • Answered on Feb 03, 2012
Not finding what you are looking for?
1996 Dodge Neon Logo

534 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

2002 Dodge Neon
2002 Dodge Neon

861 Questions

2004 Dodge Neon
2004 Dodge Neon

762 Questions

2003 Dodge Neon
2003 Dodge Neon

743 Questions

2005 Dodge Neon
2005 Dodge Neon

710 Questions

2000 Dodge Neon
2000 Dodge Neon

606 Questions

Top Dodge Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Neon Dodge

  • Neon Dodge

Most Popular Question

turn signals brake lights quit working

  • Cars & Trucks
Loading...