20 Most Recent
2001 Ford Focus - Page 8 Questions & Answers
Get oil dipstick tube out
most cars have a bolt towards the bottom of the oil tube, remove this bolt and the tube just presses in, so pull it up. God-Bless!
Where is the code reader plug located
The OBDII CODE READER PORT is directly under the driver side dashboard either by your left knee, right knee or dead center. If you lay on your back & look straight up below the steering wheel... you can't miss it. The only exception to this rule were in the 90's and only foreign cars.
Pvc location on Ford Focus 2001 se
The Positive Crankcase Ventilation (PCV) valve is located below the two small hoses near radiator...On the right side by exhaust manifold...It can be removed from beneath the car by pushing up on the hose which is connected to the valve...Then twist to remove...It is not easy and best done with front of vehicle on jack stands
I’m happy to help further over the phone at
https://www.6ya.com/expert/david_6df67de3b14de867
My car recently died in the street, no dash lights, no horn, won't start and emits a high pitched tone when the key is turned on.
Unfortunately David. The security for your car is in the cluster.So your going to have to go back in and check yours and his work. Using but connectors on these wires is a no no. solder them. Add wire if you have to. Shrink wrap them. If the other guy pulled the board out, you need to pull it out also. Look very closely at it and make sure there are no cracks in it. If so follow the crack and repair any broken or not broken board leads(small copper lines across the break). Scrape the coating off the lead and solder a number 32 or 40 wire across the break. If it is not broke, it will be soon. Easier to follow the lead from one point to another and solder there. If you don't have the time to do this, then it will need another cluster. It will also need to be programmed at a dealership. One way to get around this is to go to the junk yard and find a compatible car. You have to pull the PCM, BCM, Cluster, ignition switch/lockset, and have the key for it. But it has to match your engine and transmission. When I do this, I grab the door lockset and the trunk lockset also.
Where are the fuel injectors
they are located between the fuel rail and the intake manifold. you can use cleaner that you can get at a auto parts store but there is not much cleaner chemical in it as that is why they want you to use it multiple times. go to a shop that has a fuel system cleaning machine to have the injectors cleaned as they don`t necessarily need to be removed to clean.
My daughter drove car home, she report car was shut off twice, next day it won't start, just grunt for a second or two, engine not turn over, replaced battery, and starter do same thing; grunt then st
Forst off- buy obd2 bluetooth from ebay, it is cheap as chips and with torque app you can read faults. It may be many things, but if with new battery engine won't turn over it may as well be that the engine is having some incredible internal resistance e.g. it is dead. (Well, fixable but expensive). It's easy to check though. Get the car on tow and try to start it this way. If it gives you trouble still try to use fifth gear while towing, to get things moving. If you've never started car this way- ignition on- get some speed, gear in and clutch up. Be careful not to tailgate the towing car though. My friend had a problem like this once. Three different mechanics told him that the engine is dead. Beyond sensible repair. So I towed him to the scrap yard. In order to have brakes working properly he kept the car in fifth every time we had to slow down. Few miles down the road at scrappies the engine started like new and had no problems for another year. No idea what was the problem. Try - and listen what is going on.
Not finding what you are looking for?
