20 Most Recent 1996 Buick Roadmaster Questions & Answers


Before doing that, I would find the wire at the fuse panel that goes to the pump and try jumping it there - could be corrosion in the relay socket, the wrong relay or something like that.

1996 Buick... | Answered on Oct 24, 2017


Sounds like you need a plumber. Check the water flow through the heat exchanger, you may find it only needs flushing through or the blades on the water pump are corroded away.

1996 Buick... | Answered on Sep 06, 2017


Under passanger side of the instrument cluster behine glove box . To see it you will need to take the insulator panel down and take glove box out .

1996 Buick... | Answered on Feb 16, 2017


Sounds like a its out of timing

1996 Buick... | Answered on Aug 25, 2016


On your engine most likely close to the oil filter . Have a close look around where the oil filter attaches to the engine.

1996 Buick... | Answered on Dec 19, 2015


You will need to get a copy of the shop manual, so you'll know how to pull your dash cover and gauge cluster as necessary to replace the bulbs. You can get the shop manual in print or on disc from Irv Bishko, and other sources. Bishko Books Repair Manuals Owners Manuals Parts Books Sales Brochures

1996 Buick... | Answered on Nov 06, 2015


1996 Roadmaster

  1. Locate the programming connector located in the LH trunk. Trim may have to be pulled back to access programming connector. ( Connector has black/white wires leading up to it and it is not connected to anything.)
  2. Jump programming connector terminals. Leave terminals jumped unitl step 6.
  3. System should now lock and unlock doors to indicate programming mode has been entered.
  4. Press any button on keyless remote once. System should now lock and unlock doors, indicating successful programming of keyless remote.
  5. Repeat step 4 for additional remote or other existing keyless remote. NOTE: A maximum of only two Keyless Remotes can be programmed.
  6. Remove programming connector jumper wire to exit programming mode.
  7. Test remote(s).

1996 Buick... | Answered on Oct 19, 2015


You answered your own question. There is a problem with the fuel system. Check the fuel filter, fuel pressure, fuel pump and possibly plugged injectors. Using a scan tool can narrow your search for this problem

1996 Buick... | Answered on Mar 02, 2015


That is an oxygen sensor, these sensors send a signal to the computor to adjust the rich/lean fuel mixture.
When a code comes up for them, they generally need replacing.

1996 Buick... | Answered on Jan 26, 2015


Here is av full walktthru on youtube:
https://www.youtube.com/watch?v=U_-ECgi1_ag

Hope it work, looks fun!

Best /THomas

1996 Buick... | Answered on Jan 26, 2015


Check the operation of the latch while it's open. Maybe the latch accidentally got pushed into the locked position so it won't lock around the pin. Unlock the latch, then manually pull back the tabs.

1996 Buick... | Answered on Jan 11, 2015


THIS VEHICLE HAS OPTIC SPARK DIST. THE PLUG WIRES RUN ALONG A CHANNEL BEHIND THE ALT AND A/C COMPRESSOR. THE WIRES MUST BE PROPERLY INSTALLED IN THE CHANNELS OR CHAFFING AND PINCHING WILL RESULT. VERY GOOD SYSTEM, JUST A LITTLE HARD TO REPLACE.

1996 Buick... | Answered on Dec 09, 2014


Have your accelerator pedal, and accelerator cable checked.

1996 Buick... | Answered on Sep 26, 2014

Not finding what you are looking for?
1996 Buick Roadmaster Logo

236 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Buick Experts

Marvin
Marvin

Level 3 Expert

85223 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Roadmaster Buick

  • Roadmaster Buick

Most Popular Question

need know location oil pressure sending

  • Cars & Trucks
Loading...