20 Most Recent
1992 Dodge Ramcharger Questions & Answers
My1992 dodge van stalls when i put it into gear sometimes.
Please check your motor mounts.
A broken, or even a worn motor mount or two can negatively pull on your linkages so that your van will do this.
Understand that if the motor and/or transmission moves loosely, other things can be affected, such as shifting gears and wiring.
God bless your efforts.
Change ignition switch
If it is on the steering column you will need to remove the steering wheel and the plate behind it. Then remove the screw are it may be a slide pin but ether way remove it , that is what hold the switch in the steering column . Replace in reverse order. By the way if you dont have a steering wheel puller go to auto zone they will rent you one believe me it will make taking the steering wheel off a lot easier. Good luck.
Flooding out bad
There is only one way for gas to get into your oil pan and that is past the piston rings, if they are worn bad it also effects vaccuum pressure and throws off fuel regulator and all sorts of other ****.
Do a compression test to find out,
1991 dodge ram 360 w/throttle body problem
Float is stuck in carburetor needle and seat probably stuck open remove the top of carb Check for dirt in the float bowl spray clean with carb cleaner try turning over the motor and see if fuel stops when bowl is 2/3 rds full if not clean again and make sure you have a in-line fuel filter installed also.
Throttle body doesnt take in air when accelarating
The engine is a vacuum pump & a compressorSo it is taking in all the air it needsDon't know what was accomplished changing athrottle bodyDon't really know if you had a thing tested & how or whyWhat are the driveability symptoms,who is working on them?
Not finding what you are looking for?