20 Most Recent
1990 Ford Mustang Questions & Answers
1990 2.3 stang won't start
If I remember correctly, the signal for the pump comes from the cam sensor. The pump should run for 3-6 seconds when the key is first turned to the "on" position and then when the ECU registers pulse from the cam sensor it sends the signal to the relay to run the pump. If you have a signal coming out of the cam sensor I would look to ECU replacement.
12/18/2017 10:00:06 PM •
1990 Ford...
•
Answered
on Dec 18, 2017
Have a problem with my
Not very easy with the door closed, but call on all your resources, you probably could do it. Some bending maybe needed. You might even consider removing the driver's seat- that would give you lots more room-lol. The whole upper part has to lift up and over the window channel to remove. That is after you get all the screws and plastic push pins unfastened so the panel is free to pull off.
Before you do all that, try rolling the window all the way down and direct some spray down towards the lock cylinder and rod. You might loosen it up to work.
11/5/2017 12:07:15 AM •
1990 Ford...
•
Answered
on Nov 05, 2017
Not finding what you are looking for?