20 Most Recent
1989 Ford Ranger Questions & Answers
How to bleed 89 ford ranger 4x4 clutch
there is a bleeder screw by the transmission slave cylinder that you bleed the air out.just pump the clutch pedal a few times hold the pedal to the floor and have someone crack open the bleeder screw to bleed the air out then close it and repeat.make sure the master cylinder for the clutch doesn`t go low.
Blowing fuses
Are you sure you have the correct voltage battery or have you got the terminals the right way as it sounds like you have cross wired it or put too much power through it.
Truck sputtering out after running for period of time
run the fault codes and check for an EVAP venting problem
could be the valve or the solenoid to control the valve
indicates that the fuel pump is having trouble pulling fuel against th vacuum in the tank from a vent problem
NO MARCA LA TEMPERATURA, COMPRE
El sensor esta en la parte frontal superior del motor, a un lado de la manguera que conecta al termostato, tiene dos entradas de espada, remueva el conector, remueva el sensor e instale el nuevo, asegurese que las conexiones esten bien sujetas al nuevo sensor.
Saludos.
Not finding what you are looking for?