20 Most Recent
1993 Ford Probe Questions & Answers
Why does the alternator/ water pump belt keep
you have a pulley locking up that is breaking belt. with belt off spin pulleys by hand and feel for anything abnormal. wobbles, sticks or bind. due this for all pulleys ran by that belt u will find your problem
I have a 1993 ford probe and it will crank over
It could be many things. I would start with taking the coil packs or ignition coil to autozone or advanced auto to have them checked. Not exactly sure which one that model prob has but I would check that first. If this part is not the culpret it is more likely that your Crankshaft Sensor has went bad. they are not usually very expensive to change but they can be hard to get to. Good luck!
How do I remove 93 ford probe intake manifold
2.0 or 2.5?
here is 2.0
if you need more just let me know
- Disconnect battery ground cable, then isolate cable end with electrical tape or equivalent.
- Remove air intake system and fuel line mounting bracket.
- Disconnect throttle cable.
- Disconnect coolant line from idle air bypass air valve.
- Disconnect coolant and vacuum lines from throttle body. Mark vacuum lines for installation reference.
- Disconnect throttle position sensor connector.
- On models with automatic transaxle, disconnect idle switch connector.
- Disconnect brake booster vacuum line from back lefthand side of intake manifold.
- Disconnect EGR temperature sensor connector, if equipped.
- Disconnect speed control vacuum line from back righthand side of intake manifold.
- Disconnect EGR solenoid connectors.
- Remove PCV valve from cylinder head cover.
- Raise and support vehicle.
- Remove intake manifold support bracket, then the EGR pipe from intake manifold.
- Lower vehicle and remove intake manifold attaching bolts and nuts.
- Remove intake manifold and discard gasket.
Intake Manifold Tightening Sequence
- Reverse procedure to install. Torque bolts and nuts in sequence to 14-19 ft lb.
My name is Tim and I work for a company called AutoEcu1 We specialize in many different controllers such as abs ebcm ecu ecm tcu tcm climate controllers dash clusters speedometers and so much more. If you need further assistance on this or any other vehicle please post here or call us at 800 921 9060 good luck!
Regards,
-Tim
Replace the heater core in a 93 ford probe
You may google it, or you can pick up a haynes or chilton manual for cheap. Alldata and mitchell are great sources, but cost money. Check your local library or college, they may have alldata or mitchell subscribed and free to use. Our library does. Those programs are the same that repair facilities and dealerships use (I also use those).
Not finding what you are looking for?