20 Most Recent 1996 Ford Ranger SuperCab - Page 8 Questions & Answers


If you need to replace the switch here's a video that shows you how to do it.

1996 Ford Ranger... | Answered on Oct 19, 2011


Get a hanes or chilton Manuel from te parts store. They have full engine overhaul "how to's"

If you run into huge issues google ford truck forum. Join a couple forums and people will be more then happy to help you out.

1996 Ford Ranger... | Answered on Oct 17, 2011






  • When you get to the link click on "Click here to start download from MediaFire.." and the PDF will download onto your computer.

  • If you have any comments please feel free to leave them here.
  • Hope this helps and thank you for using FixYa.


Regards, Tony

1996 Ford Ranger... | Answered on Oct 10, 2011


Hello! There are two options in stereo for your vehicle; Base Radio and Premium sound...That is no amplifier with radio and with an Amplifier/CD player for Premium...Which do you have? Also, what make and model are you installing?

Guru....Saailer

I’m happy to help further over the phone at https://www.6ya.com/expert/david_6df67de3b14de867

1996 Ford Ranger... | Answered on Oct 10, 2011


MAKE SURE YOURE TIOMINGB MARKS ARE L;INED UP ON THE CRANCKSHAFT ,, DID YOU USE A TIMING LIGHT ?

1996 Ford Ranger... | Answered on Oct 09, 2011


Try to check in the 1996 Ranger Owner Guide (1st Printing), in this document could find information like this diagram, with description and location...

zjlimited_1984.jpg

zjlimited_1985.jpg

Hope this helps.

1996 Ford Ranger... | Answered on Oct 04, 2011


check the position of the throttlebody the throttlebody must not close properly there must be a gap when fully closed if theres a throttleposition sensor replace it

1996 Ford Ranger... | Answered on Sep 29, 2011


The base radio has two fuses in the I/P fuse block. Fuse 20 7.5 amp and fuse 29 10 amp. It will be obvious which fuse is blown when you inspect them.

The premium radio has the same fuses as the base but also has one in the engine compartment fuse block. Fuse 22 - 20amp.

I’m happy to assist further over the phone at https://www.6ya.com/expert/jeremy_d728a59f986299fa

1996 Ford Ranger... | Answered on Sep 28, 2011


http://www1.fixya.com/cars/t10573771-1996_ford_ranger_touched_negative

Did you check all of the fuses I posted? Was the fuse that you changed blown? Do you have power to the fuses?

I’m happy to assist further over the phone at https://www.6ya.com/expert/jeremy_d728a59f986299fa

1996 Ford Ranger... | Answered on Sep 28, 2011


You have to look at the exhaust gas readings

Sometimes in my State on newer cars, they don't give you that
I have to go to the MV Web site to see the report in full

A high CO would be a rich condition
A high NOX would be overheating

Then the other gases etc

Now if you want a complete manual or set of instructions
for every diagnostic procedure to correct something,
your asking far too much.

So let me know if you work on your own vehicles
If not go to a repair shop

1996 Ford Ranger... | Answered on Sep 22, 2011


check for a stuck closed thermostat.

1996 Ford Ranger... | Answered on Sep 21, 2011


click on this link,, and scroll down to locate your year, Fords are all the same,, this has your plug in with color codes and what they are for !! http://www.installdr.com/Harnesses/Ford-Wiring.asp

1996 Ford Ranger... | Answered on Sep 12, 2011


I would start out by calling a dealer with my VIN in hand. It has a 3 or 5 year bumper to bumper warranty. You are most likely within one of them and certainly the other. Further they will take a look at it and even if not under warranty tell you exactly what is wrong with it. It helps so much to have someone who knows what they are doing actually put their hands and eyes on it.

1996 Ford Ranger... | Answered on Sep 12, 2011


Suggest you change the fuel filter, and do a pressure check of the fuel pump. It sounds like a fuel flow problem and those are the two items that fail the most.

1996 Ford Ranger... | Answered on Sep 08, 2011


Eather your batt is bad or your alternator is not charging!

1996 Ford Ranger... | Answered on Sep 05, 2011


replace the flasher first. Usually under dash by fuse panel.

1996 Ford Ranger... | Answered on Aug 24, 2011


Hello! See attached diagram of fuse locations...It is located in fuse box #2...The BOTTOM row of fuses counting from left to right are: 32, 33, 34, and 35....The fuse that controls the cigar lighter/computer is fuse # 29 (20A) and is in the row ABOVE the bottom row...These fuses count from left to right: 26, 27, 28, 29 (This is the bad one) 30, and 31....Guru...............Saailer


saailer_93.gif

I’m happy to help further over the phone at https://www.6ya.com/expert/david_6df67de3b14de867

1996 Ford Ranger... | Answered on Aug 23, 2011


something that old your first goal is to locate a serviceable used unit, the whole cluster not just the speedo, via eBay or a junkyard. less than 50 bucks, but there is no warranty.
once located you look for a video on youtube of someone pulling the cluster, or buy a repair manual for a few bucks on eBay. watch someone do it or follow the instructions.
you may want to try that in reverse as the thing is only worth 500 bucks and will not be worth another cent with a working speedo. if it is too much work for you, then most likely you will not want a used speedo laying around.

1996 Ford Ranger... | Answered on Aug 17, 2011

Not finding what you are looking for?
1996 Ford Ranger SuperCab Logo

742 questions posted

Ask a Question

Usually answered in minutes!

Top Ford Experts

Marvin
Marvin

Level 3 Expert

85222 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

gerry bissi

Level 3 Expert

4388 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Ranger Ford

  • Ranger Ford

Most Popular Question

cause 1996 ford ranger no going in gear

  • Cars & Trucks
Loading...