1996 Ford Ranger SuperCab - Page 5 - Answered Questions & Fixed issues

0helpful
1answer

Location of canisterpurge solenoid/flowsensor 1996

It is located right next to the carbon canister under the truck on a tray that is mounted near the fuel tank.
11/23/2011 12:28:40 AM • 1996 Ford Ranger... • Answered on Nov 23, 2011 • 85 views
0helpful
1answer

1996 ford ranger will not stay started I put gas

sounds like fuel pump in tank is not working. Can you hear it hum when you turn key to ON?

It should hum for 5 seconds and build up 40 psi of fuel pressure.
10/22/2011 3:04:09 AM • 1996 Ford Ranger... • Answered on Oct 22, 2011 • 199 views
0helpful
2answers

1996 ranger turn signals and

If you need to replace the switch here's a video that shows you how to do it.
10/19/2011 4:06:43 PM • 1996 Ford Ranger... • Answered on Oct 19, 2011 • 1,144 views
0helpful
1answer

Need to rebuild 1996 2300 engine

Get a hanes or chilton Manuel from te parts store. They have full engine overhaul "how to's" If you run into huge issues google ford truck forum. Join a couple forums and people will be more then happy to help you out.
10/17/2011 3:00:53 PM • 1996 Ford Ranger... • Answered on Oct 17, 2011 • 159 views
0helpful
1answer

Still dont knowwhats wires to connect to the

Hello! There are two options in stereo for your vehicle; Base Radio and Premium sound...That is no amplifier with radio and with an Amplifier/CD player for Premium...Which do you have? Also, what make and model are you installing?

Guru....Saailer I’m happy to help further over the phone at https://www.6ya.com/expert/david_6df67de3b14de867
10/10/2011 6:06:00 PM • 1996 Ford Ranger... • Answered on Oct 10, 2011 • 197 views
0helpful
1answer

Does anybody know what wires you connect to a





  • When you get to the link click on "Click here to start download from MediaFire.." and the PDF will download onto your computer.

  • If you have any comments please feel free to leave them here.
  • Hope this helps and thank you for using FixYa.


Regards, Tony

10/10/2011 6:23:50 PM • 1996 Ford Ranger... • Answered on Oct 10, 2011 • 273 views
0helpful
1answer

Changed timing belt in ford ranger 2.3 engine,

MAKE SURE YOURE TIOMINGB MARKS ARE L;INED UP ON THE CRANCKSHAFT ,, DID YOU USE A TIMING LIGHT ?
10/9/2011 3:56:36 AM • 1996 Ford Ranger... • Answered on Oct 09, 2011 • 217 views
0helpful
1answer

Need fuse box diagram for 1996 ford ranger

Try to check in the 1996 Ranger Owner Guide (1st Printing), in this document could find information like this diagram, with description and location...

zjlimited_1984.jpg

zjlimited_1985.jpg

Hope this helps.
10/4/2011 7:59:43 PM • 1996 Ford Ranger... • Answered on Oct 04, 2011 • 1,920 views
0helpful
2answers

1996 ford ranger xlt 4.0 starts ok if you keep

check the position of the throttlebody the throttlebody must not close properly there must be a gap when fully closed if theres a throttleposition sensor replace it
9/29/2011 11:16:30 PM • 1996 Ford Ranger... • Answered on Sep 29, 2011 • 266 views
0helpful
1answer

1996 ford ranger....me and my friend tried to put

http://www1.fixya.com/cars/t10573771-1996_ford_ranger_touched_negative

Did you check all of the fuses I posted? Was the fuse that you changed blown? Do you have power to the fuses? I’m happy to assist further over the phone at https://www.6ya.com/expert/jeremy_d728a59f986299fa
9/28/2011 1:05:42 AM • 1996 Ford Ranger... • Answered on Sep 28, 2011 • 101 views
0helpful
1answer

1996 ford ranger..touched the negative and

The base radio has two fuses in the I/P fuse block. Fuse 20 7.5 amp and fuse 29 10 amp. It will be obvious which fuse is blown when you inspect them.

The premium radio has the same fuses as the base but also has one in the engine compartment fuse block. Fuse 22 - 20amp. I’m happy to assist further over the phone at https://www.6ya.com/expert/jeremy_d728a59f986299fa
9/28/2011 2:18:01 AM • 1996 Ford Ranger... • Answered on Sep 28, 2011 • 333 views
0helpful
1answer

ASM EMISSION TEST RESULTS AT 15MPH FAILED. WHAT

You have to look at the exhaust gas readings

Sometimes in my State on newer cars, they don't give you that
I have to go to the MV Web site to see the report in full

A high CO would be a rich condition
A high NOX would be overheating

Then the other gases etc

Now if you want a complete manual or set of instructions
for every diagnostic procedure to correct something,
your asking far too much.

So let me know if you work on your own vehicles
If not go to a repair shop

9/22/2011 9:36:02 PM • 1996 Ford Ranger... • Answered on Sep 22, 2011 • 988 views
0helpful
1answer

My 2008 ford ranger is

check for a stuck closed thermostat.
9/21/2011 11:48:26 PM • 1996 Ford Ranger... • Answered on Sep 21, 2011 • 208 views
0helpful
1answer

Putting a diff. cd player in my 1996 ford ranger.

click on this link,, and scroll down to locate your year, Fords are all the same,, this has your plug in with color codes and what they are for !! http://www.installdr.com/Harnesses/Ford-Wiring.asp
9/12/2011 5:22:19 PM • 1996 Ford Ranger... • Answered on Sep 12, 2011 • 350 views
0helpful
1answer

What should i check if

I would start out by calling a dealer with my VIN in hand. It has a 3 or 5 year bumper to bumper warranty. You are most likely within one of them and certainly the other. Further they will take a look at it and even if not under warranty tell you exactly what is wrong with it. It helps so much to have someone who knows what they are doing actually put their hands and eyes on it.
9/12/2011 4:14:54 PM • 1996 Ford Ranger... • Answered on Sep 12, 2011 • 70 views
0helpful
1answer

Have to pump gas before

Suggest you change the fuel filter, and do a pressure check of the fuel pump. It sounds like a fuel flow problem and those are the two items that fail the most.
9/8/2011 4:23:31 PM • 1996 Ford Ranger... • Answered on Sep 08, 2011 • 100 views
0helpful
1answer

Truck will not start. Have to get a jump. After

Eather your batt is bad or your alternator is not charging!
9/5/2011 2:07:55 PM • 1996 Ford Ranger... • Answered on Sep 05, 2011 • 66 views
0helpful
1answer

Turn signals do not flash.

replace the flasher first. Usually under dash by fuse panel.
8/24/2011 8:03:23 PM • 1996 Ford Ranger... • Answered on Aug 24, 2011 • 93 views
0helpful
1answer

2008 ford ranger fuse for

Hello! See attached diagram of fuse locations...It is located in fuse box #2...The BOTTOM row of fuses counting from left to right are: 32, 33, 34, and 35....The fuse that controls the cigar lighter/computer is fuse # 29 (20A) and is in the row ABOVE the bottom row...These fuses count from left to right: 26, 27, 28, 29 (This is the bad one) 30, and 31....Guru...............Saailer


saailer_93.gif I’m happy to help further over the phone at https://www.6ya.com/expert/david_6df67de3b14de867
8/23/2011 7:59:22 PM • 1996 Ford Ranger... • Answered on Aug 23, 2011 • 4,682 views
0helpful
1answer

I have a 96 ford

something that old your first goal is to locate a serviceable used unit, the whole cluster not just the speedo, via eBay or a junkyard. less than 50 bucks, but there is no warranty.
once located you look for a video on youtube of someone pulling the cluster, or buy a repair manual for a few bucks on eBay. watch someone do it or follow the instructions.
you may want to try that in reverse as the thing is only worth 500 bucks and will not be worth another cent with a working speedo. if it is too much work for you, then most likely you will not want a used speedo laying around.
8/17/2011 4:11:04 PM • 1996 Ford Ranger... • Answered on Aug 17, 2011 • 253 views
Not finding what you are looking for?
1996 Ford Ranger SuperCab Logo

744 questions posted

Ask a Question

Usually answered in minutes!

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...