20 Most Recent 1999 Ford Ranger SuperCab - Page 6 Questions & Answers

If you engine actually seized, it will not turn over at all, not ever with a ratchet on the crank pulley or vibration damper as most call it. If this is so, you have internal damage to your engine. I would say the oil pump shaft broke and cause the bearings to seize. You will need a complete overhaul. Zero oil pressure is the answer that tells me that major damage has been done.

1999 Ford Ranger... | Answered on Apr 11, 2014

On vehicles equipped with antilock brakes (ABS), a second warning light is provided to warn if a problem occurs within the ABS system. The ABS lamp comes on when the ignition is turned on for a bulb check, then goes out after the engine starts. If the ABS warning light remains on or comes on while driving, it indicates a fault has occurred in the ABS system.

What happens next depends on the nature of the fault. On most applications, the ABS system disables itself if the ABS warning light comes on and remains on.

1999 Ford Ranger... | Answered on Apr 08, 2014

Well code 352 is for a problem with the primary circuit for the coil which could be several things other than the coil itself. You would need a shop manual to get the testing procedures. There's no distributor, so it could involve the cam or crank sensor, the engine computer, or the wiring.
Code 303 is for now power on cylinder 3 and 304 is no power on cylinder 4. In this case probably no spark.

1999 Ford Ranger... | Answered on Apr 08, 2014

Replace the rubber flex hoses & check that the calipers
are not all rusty inside & pistons frozen or sticking

If the fluid wasn't changed every two years,just replace the
caliper as well,their shot from moisture & old fluid

I start by flushing all four corners
Then remove the master & clean out the bore &
piston of all the white nasty moisture
Then change the hoses & calipers
Machine the rotors & install Raybestos Ceramic Pads

Then do the back the same

Then Check the parking cables,their probably done by now also
Rusted inside & not worth playing with

1999 Ford Ranger... | Answered on Mar 28, 2014

Check the relay fuses and anything that runs with the alarm and make sure nothing is grounding out your main problem is the illumination wire is making a contact someplace to confuse the interior lighting

1999 Ford Ranger... | Answered on Mar 23, 2014

If it starts and runs but only the check engine light does not come on at all then the bulb is burned out. If all gages are working and or not this place in Duluth, Ga. will fix all " myairbaggs.com" check it out I have used them. They are great ! Hope this helps, Lee

1999 Ford Ranger... | Answered on Mar 20, 2014

Not finding what you are looking for?
1999 Ford Ranger SuperCab Logo

1,025 questions posted

Ask a Question

Usually answered in minutes!

Top Ford Experts


Level 3 Expert

85216 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

gerry bissi

Level 3 Expert

4388 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Ranger Ford

  • Ranger Ford

Most Popular Question

heater intake located

  • Cars & Trucks