20 Most Recent
2004 Ford GT Questions & Answers
Ignition timing specs
I have a Gran Torino also and the best place to find that answer is at the Library reference section ( those books can't be checked out so there complete) just copy what you need, there located were they have all the older car repair manual. I once worked at the library part time so I know well. Those old school manual had everything you needed very detailed section by section. Unlike chiltons books today for civilian use they have nothing at all.
2/26/2010 7:31:06 AM •
2004 Ford GT
•
Answered
on Feb 26, 2010
Rear wheel bearing
SECTION 205-02B: Rear Drive Axle/Differential — Ford 8.8-Inch Ring Gear
2003 Mustang Workshop Manual
IN-VEHICLE REPAIR
Axle Shaft
Removal
- Raise and support the vehicle. For additional information, refer to Section 100-02 .
- Remove the wheel and tire assembly. For additional information, refer to Section 204-04 .
- Remove the rear brake disc (2C026). For additional information, refer to Section 206-04 .
- Remove the differential housing cover (4033) and drain the lubricant. For additional information, refer to Differential Housing Cover in this section.
- Remove the differential pinion shaft (4211).
- Remove the differential pinion shaft lock bolt (4241).
- Remove the differential pinion shaft.
-
CAUTION: Do not damage the rubber O-ring in the axle shaft groove.
Remove the U-washer (4N237).
- Push the axle shafts (4234) inboard.
- Remove the U-washer.
-
CAUTION: Damage to the rear brake anti-lock sensor (2C190) may occur if it is not removed before the axle shaft.
Carefully remove the rear brake anti-lock sensor. For additional information, refer to Section 206-09A .
-
CAUTION: Do not damage the wheel bearing oil seal.
Remove the axle shaft.
--------------------------------------------------------------------------------------
Rear Wheel Bearing and Axle Shaft Oil Seal
Removal
- Remove the axle shaft (4234). For additional information, refer to Axle Shaft in this section.
-
NOTE: If the wheel bearing oil seal is leaking, the axle housing vent may be plugged.
Using the special tools, remove the rear wheel bearing and wheel bearing oil seal.
Installation
- Lubricate the new rear wheel bearing with the specified lubricant.
- Using the special tools, install the new rear wheel bearing.
- Lubricate the lip of the new wheel bearing oil seal.
- Use Premium Long-Life Grease XG-1-C or equivalent meeting Ford specification ESA-M1C75-B.
- Using the special tools, install the new wheel bearing oil seal.
- Install the axle shaft. For additional information, refer to Axle Shaft in this section.
-------------------------------------------------------------------
Installation
- Lubricate the lip of the wheel bearing oil seal
- Use Premium Long-Life Grease XG-1-C or equivalent meeting Ford specification ESA-M1C75-B.
-
CAUTION: Do not damage the wheel bearing oil seal.
Install the two axle shafts.
-
CAUTION: Do not damage the rubber O-ring in the axle shaft groove.
Install the U-washer.
- Position the two U-washers on the button end of the axle shaft.
- Pull the axle shaft outward.
-
NOTE: If a new pinion shaft lock bolt is unavailable, coat the threads with Threadlock and Sealer EOAZ-19554-AA or equivalent meeting Ford specification WSK-M2G351-A5 prior to installation.
Install the differential pinion shaft.
- Align the hole in the differential pinion shaft with the case lock bolt hole.
- Install a new differential pinion shaft lock bolt.
- Install the differential housing cover and fill the rear axle with the specified lubrication. For additional information, refer to Differential Housing Cover in this section.
- Install the rear brake anti-lock sensor. For additional information, refer to Section 206-09A .
- Install the rear brakes. For additional information, refer to Section 206-04 .
- Install the tire and wheel assembly. For additional information, refer to Section 204-04 .
- Lower the vehicle.
4/16/2009 2:03:10 AM •
2004 Ford GT
•
Answered
on Apr 16, 2009
Wiring diagram for tow bar electrics on a 1999
WIRING DIAGRAM FOR 12N TYPE 7-PIN Black
socket or plug
for vehicle road lights
Colour
Terminal
Purpose
Looking at the Socket
towards the plug.
Looking at the Plug towards the socket.
Yellow
1 (L)
LH Indicator
Blue
2 (54G)
Rear Fog Light (or Aux.)
White
3 (31)
Earth
Green
4 (R)
RH Indicator
Brown
5 (58R)
RH side Light
Red
6 (54)
Stop Lights
Black
7 (58L)
LH Side Light
ESP/ABS warning lights illuminates
the abs switch could be going bad or the relay for it could be weak.the relay is under the hood.have it checked taking care of one problem could solve the other
Not finding what you are looking for?