20 Most Recent
1996 Ford F250 Crew Cab Questions & Answers
1996 f250 7.3 powerstroke has rough idle on starts
it sounds like to that it is either worn/ old injectors,dirtly HPOP (high pressure oil pump) oil worn HPOP pump or dirty fuel filters or fuel. you can take truck to a qualified diesel shop and they can do a buzz test on your injectors and see if they need to be replaced with a buzz test the tester will buzz all eight injectors with engine off and you can hear the buzz of the injectors then it will go through and buzz each injectors individually in firing order to der determin witch ones are bad. the bad injectors will be alot quieter than the other and most testing equipent will show what they are running at. hope this helps.
How to fix obd code p1351
P1351 Ignition Diagnostic Monitor circuit Input fault
The code 1351 in most case is set when the Ignition moduel has been replace with the gray one and it calls for the Black one.
The ICM for this vehicle should be Black in
color instead of Grey. Ford parts books are incorrect and show that
this vehicle should have a Grey module. The Motorcraft part number for
the Black ICM is a DY-679
Good luck and make sure you use the OEM part.
How to wire ford 1963 solenoid ?
the solenoid has to large terminals and one small one .Run a cable from the battery to the large solenoid terminal marked Batt. then run a cable from the other large terminal to the starter motor terminal. The small terminal connects to the dash ignition starter switch or push button
Not finding what you are looking for?