1997 Ford Expedition - Answered Questions & Fixed issues
My 1997 Ford Expedition 4.6 will start with a jump but won't crank, any help?
It is likely that the battery needs to be replaced. Check the connections to make sure they are clean and secure. If the connections are good, then the battery may need to be replaced. Additionally, check the alternator and starter to make sure they are functioning properly. If they are not, they may need to be replaced or repaired.
1/31/2023 10:28:29 AM •
1997 Ford...
•
Answered
on Jan 31, 2023
•
41 views
My 1997 ford expedition has
Hi
The reason for the backfiring is bad connection with the cylinders. Check whether the plug wires going to the right cylinders. If no, correct that to fix the backfiring. Also for power check the choke and fuel filter?
Let us know if you need further clarification.
Thanks for contacting fixya.com
5/5/2018 4:59:40 AM •
1997 Ford...
•
Answered
on May 05, 2018
•
291 views
1997 FORD EXPEDITION LEAKING ANTIFREEZE
You have to remove the parts to see where the leak is. Remove the manifold carefully to preserve the evidence. You can check the manifold mating surface with a straightedge. You may find the leak is actually in the head gasket. Make him show you the warpage before letting him sell you new parts. A metal part like the head can be resurfaced at a machine shop.
1/30/2018 2:26:37 AM •
1997 Ford...
•
Answered
on Jan 30, 2018
•
213 views
I have a 1997 ford expedition which lurches when
The surging usually comes from the IAC hunting to maintain a stable idle. usually your symtoms occur from a vacuum leak of some sort. plastic intakes are sometime found to be cracked from heat embrittlement. spray the top of the engine with brake clean when running. if the idle changes when spraying in a certain area you are locating the vacuum leak. the idle will change when the engine sucks in the brake cleaner.
1/26/2018 1:14:39 PM •
1997 Ford...
•
Answered
on Jan 26, 2018
•
187 views
Not finding what you are looking for?