Top 10 2001 Ford Ranger Regular Cab Questions & Answers

Year ,make, model, size, and specific parts ? Have you tried google images?

Hello motokid40: My name is Roger and I will help you. The correct plug gap for the sp-432 plug is 0.044 in. Should you need further help please just ask. Please rate the answer. Thank You for using Fix Ya. Roger

Check with a Ford Dealer about a possible recall to replace or install fusible link on cruise control cable located by master cylinder.

Hi there, Is this diagram address your request?

2000 Ford Ranger 3.0 liter V-6 VIN "U"



Hope helps (remember rated and comment this).

Hi Josiah:
According with the repair guide...4.0L Engine

1. Before servicing the vehicle, refer to the Precautions section.
   
2. Drain the engine oil.
   
3. Remove or disconnect the following:
   Negative battery cable Engine from the vehicle Oil pan Engine front cover Cylinder heads
4. Lock the jackshaft tensioner by installing a pin.
   Jackshaft sprocket and chain assembly Left front cassette retaining bolt Cassette chain and tensioner assembly Rear jackshaft plug from the engine Right rear cassette retaining bolt and spacer Right rear cassette chain and tensioner Timing chain (s)
   
   

Fig. Remove the jackshaft sprocket-4.0L SOHC Engine 2000-2001
Zooming link for Remove the jackshaft sprocket-4.0L SOHC Engine 2000-2001

To install:

1. Install or connect the following:
   Timing chain(s) Right rear cassette chain, tensioner and sprocket Jackshaft sprocket and chain on the engine and remove the tensioner pin
   
2. Torque the jackshaft sprocket bolt in 2 stages:
   1. 32-35 ft. lbs. (43-47 Nm).
      
   2. Turn an additional 65 degrees.
      
3. Install or connect the following:
   Cylinder heads Front cover Oil pan Engine to the vehicle Negative battery cable
4. Fill the engine with clean oil.
   
5. Start the vehicle, check for leaks and repair if necessary.

1. Before servicing the vehicle, refer to the Precautions section.
   
2. With the vehicle in neutral, position it on a hoist.
   
3. Remove the intake manifold.
   
4. Remove the fuel supply manifold.
   
5. Remove the accessory drive belt.
   
6. Remove the thermostat housing.
   
7. Remove the roller followers.
   NOTE You must retime the LH and RH camshafts when either camshaft is disturbed. Turn the crankshaft clockwise to position the number one cylinder at top dead center (TDC).
   
   NOTE The special tool must be installed on the damper and should contact the engine block to position the engine at TDC.
   
8. Install the special tool.
   NOTE The right-hand camshaft sprocket bolt is a left-hand threaded bolt.
   NOTE If necessary, use camshaft gear torque adapter to loosen the camshaft sprocket bolt.

Hope this helps; also keep in mind that your feedback is important and I`ll appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using FixYa, have a nice day.

Hi Jose:
Accordting with the 2001 Ford Ranger Owners Manual, you have several fuse locations...

Passenger compartment fuse panel: The fuse panel is located on the left hand side of the instrument panel facing the drivers side door.




Power distribution box: the power distribution box is located in the engine compartment. The power distribution box contains high current fuses that protect your vehicles main electrical systems from overloads.




If you need details about each fuse description, I suggest to look the right Owners Manual.

Hope this helps and feel free to contact us in the previous links; also keep in mind that your feedback is important and will appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using FixYa, have a nice day.

should be able to pull the rod after removing the handle or utilise a scredriver from inside the bed to release locking ******.

The solenoids are inside the transmission, if you are getting more than one code you may have a problem with the wiring harness going into the trans.

On this website, you find fuse box diagram and description for Ford Ranger (2001)

Ford Ranger 2001 2002 fuse box diagram Auto Genius