20 Most Recent
2003 Mazda MPV Questions & Answers
MAzda etude 323 Familia cuts out
the crank shaft sensor is bad, it is heating up, and that is why it works after the water being poured on it, it is cooling it off.....
I cannot figure out how to reset the clock. No
I have a 2003 mpv. my radio has a clock button. it also has a scan / auto rocker button.
i press and hold the clock button till the numbers flash then press the scan button to change the hour and the auto button to change the minute. when the time is right, i push the clock button again.
hope this helps you!
How do I set the timing mark for Mazda MPV 2003?
Hi there's this website something like reliable-store and it is very amazing for manual for repairing servicing anything
someone on fixya recommended it to me and I thank him even today
They have full manuals and it's verrrrry cheap and mine
I got free in offers
3rd time I also had an issue with
the file so the girl replaced it in 30 mins
there is one more but i don't remember its name it was 2 years back bitman something link this
Try it out brother
Mazda 3.0L V6 MPI have timing belt or chain
Well as of 2005 or so the v6 tribute has a Ford motor that has a timing chain not a belt the 4 cylinder has a Mazda motor that has a belt and should be changed every 90000 miles. So those swing the v 6 has a belt are totally wrong here
Cylinders 4, 5 & 6 misfire. Lean bank 2 sensor 1
it is a regular fault
generally it is the Heated oxygen sensor (HO2S) in the exhaust manifold before the cat converter
other cause can include engine mechanical fault ( unlikely)---wiring---ignition / fuel system--injectors ---ECT/MAF sensor---ECM
a vacuum problem will affect both banks as will a PCV valve
The HO2S reads the exhaust gas composition and reports to the ECM which then adjusts the air /fuel ration accordingly to keep it within set parameters
The code says bank 2 sensor 1 which is the HO2S sensor so replace it and then have the codes read again
Not finding what you are looking for?