20 Most Recent 2005 Suzuki Forenza Questions & Answers

now to remove a pipe to hose at core can be hard. we cut them off, with sharp knife there so we DO NOT damage the core tube (nobody want to remove the whole dash ,doing this wrong) I cut them off and replace with new. any mech knows this so have them do it. heater cores are very fragile. do not forget this.

Take it to a workshop you can't adjust them properly without using a headlamp alignment machine

I have the same problem few days ago, and still didn't find any solution. Can any one please help?????18

It is coming on telling you you have low oil pressure and when you accelerate it builds enough pressure to go off. 1. Check the oil and make sure it isn't low 2. If that is OK, is it in need of an oil change as sometimes filters can become dirty causing lack of oil pressure. 3. It could also be a faulty oil sensor, but most likely it's 1 or 2

I am pretty sure the tensioner is not adjustable. It sounds like you may not have the belt in the right place. Or if you replaced it, make sure you have the correct belt.

Hello Rod, your Camshaft position sensor will be located on the engine, usually around the accessory drive pulleys. Your local Auto parts retailer will be able to provide a accurate drawing detailing the location and wiring colors.

Where the engine and transmission are bolted together.

double post?

http://www.carfusebox.com/suzuki-forenza-2005-under-dash-fuse-boxblock-circuit-breaker-diagram/

have vehicle scanned most auto stores offer this service for free the code will help with diagnosing the problem

Display connection faulty, take apart and check connection from the display screen.

old post. shows as 2016 so i bumped it. OP fails to seach first. http://www.fixya.com/search.aspx?ref=ser&s=forenza%20timing%20marks&