20 Most Recent
1999 Chrysler Town & Country Questions & Answers
1999 Town and Country: door
Get a wiring diagram. Unplug connector from BCM and do a continuity check on each door at the BCM. That'll tell you whether it's a door switch, wiring or BCM problem
A chattering noise appears when I put the transmission in gear
Hi,
Sounds like a worn/bad/damage transmisison or engine mount. These hold the engine and trans in place and usually have a rubber part that can wear out.
Either a trans shop or regular mechanic will need to diagnose.
I don't know the cost.
GL,
TD
How do you take power steering pump out of a 1999
Ok start by looseing your belt and removing it. Next remove the hoses from the pump and elevate to keep from dripping an excess of fluid. Next, unbolt the existing pump and remove. Then position the new unit and bolt back up. Re-attach the hoses. Put the belt back on and tighten until you have approx 1/4" of play. Fill the resevoir on the new pump. Start the vehicle and turn the wheels, drive a couple of miles, recheck the fluid and fill as needed. You are now in business! Good Luck! I hope you find this very helpful!
How to erase error codes
You might be able to disconnect the negative battery cable for a period of time?
Otherwise, the use of an OBD II, Scanner/Reader should be able to clear codes. Most Auto Parts stores will provide scan-read-clear services for free.
Not finding what you are looking for?