20 Most Recent 1997 Suzuki X-90 Questions & Answers

Has this been fixed?

post to ATV forum this is cars.

x-90s , very rare car.... and interesting... it uses the same engine as the sidekick the G16B its OBD2 compliant and all scan tools work here. so scan it , in the USA, any auto store will do that for free. buy one for $9 off fleabay or many mom & pop ASE autoshops will do that too. for free. it only takes 1min, to do, its not like Spook and long mind melds..... and tears. my guess, P0300 and always P0400 here is the full scan, with all sensors after finding DTC errors here (the spook thing) http://www.fixkick.com/ECU/Authority/A_Full_OBD2_scan.html here are all codes (DTCs are errors, ) http://www.fixkick.com/CEL/OBD2-CEL.html happy trails !

wow, no name of both cars. and both engines. "sierra" what's that>? engine swaps are complex (done many) my wild guess, is you are asking for the 1997 EFI system schematics for the 1997 EFI? is this M/T or A/T , the A/T now has TCM , inside the PCM/ECU. you cant find it because, its at alldata.com and didnt look there. its there,and at mitchels, and all FSM sold at fleabay. im putting X engine and EFI in to what car.? only the 1996 is online and free. the dizzy has 7 pins. and a base ground. here is just the dizzy. on a 96 G16B engine. im sure 97 is same. http://www.fixkick.com/ECU/1996/EFI1.jpg the X90 is a very rare car and doc.s are the most lacking and ive found the emmision changes, lag the Sidekick by 1/2 year. tricky beast the x90 (EGR differ) That means the ECU is too. tell exactly what you are doing. and what wires are unknown? and get far better help.. i just looked at one major online source and it shows doing service 1997 , with 1989 engine parts..... this is common in the suz world. bad docs.

usa or canada right? location?first off why not say , why looking for it? at the least.aas that fact would answer the below.there are 3, i have a drawing, need it?1: ECT (engine has 2 wires and is a thermistor)2: the dash water temp, sensor, 1 wire.3: the A/C overheat sensor, (really a switch) and guess what , all 3 are in almost the same spot.the short answer, is next to the coolant thermostat (intake man.)'longermost x90s have the G16b 16valve engine.here is the G16v , sethttp://www.fixkick.com/sensors/thermostat/96-stat-mine1w.jpgoff this page (show most parts on engine)http://www.fixkick.com/find-parts.html

its always on all engines, on the cylinders.left or right side.on the left on my 2.5Lsee my profile for link to full FSM.there is no reason to guess.

Any good quality 20W-50 grade oil will do fine for normal summer use and if your temperatures are normally moderate. In colder climates you could go down to as low as 5W-20 in relatively severe cold weather. Make sure that the oil you use conforms to API category SM and has the backing of one of the major oil companies.

The computer needs to have the codes cleared in order for it to be rest, this is something that they use the scan tool for, if they have done this and the same code comes back this is a hard code and you might want to look into the EGR valve. if the car is acting up tap the EGR valve with a rubber hammer to see if it evens out if so replace the valve. also many times i have pulled these off and the metal tube to the exhaust has been plugged up and just had to clear the tube and then it worked fine after that.
But the computer will not reset itself in most cases this is something the scan tool has to do.

allmost thats the problem
sensor should be under the main pully (crank pully)
resistence between the probs are 360 - 460 ohms

Fix what?????????????

Never saw a baleno, and have no idea what a mot is....but generally a track rod end is a screw in item that is not difficult to replace. One thing to remember though is that it needs to be screwed in the exact number of turns as it took to remove the old one and that the length after install should be exactly the same or it will throw the alignment off.

Start with 4qts. Run the engine and then check the level after turning the motor off and waiting for about 2-3 minutes.

Overall it shoudl take 4 1/4 Quarts with a filter.

The one after the cat is not an O2 sensor, I know it looks the same but it's function is to measure the efficiency of the cat converter at cleaning the pollutants out of the exhaust, what code do u have and I will try and help u.

Suzuki X-90 Fuel Lines, Hoses, Gaskets & Seals - CARiD.com

https://www.carid.com > ... > Suzuki

Results 1 - 13 of 13 - If inspection reveals suspect fuel lines or hoses on your Suzuki X-90, we have the quality replacements that you can depend on to ... Missing: 4x4 ‎' Must include: 4x4

Fuel System Components for 1997 Suzuki X-90 - World ...

https://suzukisubaruparts.worldoemparts.com > fuel-syst...

Egr Vacuum Control. Swift. Sidekick. Samurai. 1.6L, 8 valve. Without 16 valve. 1.6L, 16 valve engine. 1995-97. Back Pressure Transducer. $172.92.