20 Most Recent
1998 Cadillac Catera Questions & Answers
Where are the hoses that run to radiator to
I don't have a diagram, but your problem is the oil cooler underneath the intake on top of the engine. Remove the intake, and the cooler is right there in between the heads. Easy to change once you get the intake off. This is a VERY common problem on Cateras, and the symptom of it is oil in your coolant. I have a 1998 Catera and had the same issue.
Program a key fob 98 Cadillac cateria
So good news and bad news. Bad news is the remote portion for a 1998 Cadillac Catera Key Fob requires profressional programming. We suggest using a locksmith, they should save you some money compared to the dealer.
The good news is if you need to program another transponder key, you can do that yourself. Get a spare key cut and simply follow the instructions below:
If you need to order a key or remote you can order them online and save even more money: https://www.keylessentryremotefob.com/Cadillac-Catera-Remotes-and-Keys-s/5113.htm
· Switch ignition ON with master key to be programmed
· System LED will illuminate
· After approximately 10 minutes system LED will switch OFF
· Switch ignition OFF
· Wait 5 seconds
· Switch ignition ON
· System LED will illuminate
· After approximately 10 minutes system LED will switch OFF
· Switch ignition OFF
· Wait 5 seconds
· Switch ignition ON
· System LED will illuminate
· After Approximately 10 minutes system LED will switch OFF
· Switch ignition OFF
· Wait 5 seconds
· Start engine
· New master key now programmed
· Erase stored trouble codes
· Replacement parts caan also be programmed using diagnostic equipment
· NOTE: The vehicle learns the key transponder information on the ignition switch transition from OFF to CRANK. Ignition must be turned OFF before attempting to start the vehicle
· Insert master key into ignition switch
· Switch ignition ON
· Switch ignition OFF
· Remove master key
· Within 10 seconds insert new key
· Switch ignition ON
· New key now programmed
· NOTE: A maximum of 10 keys can be programmed using the master key
How to fix 98 cadillac cater error codes
Reset error codes by disconnecting battery for 5 minutes. Start fresh. all codes should be clear now. drive and see if any new codes come on. They are the ones you need to address.
Cadillac diagnostic codes
P1112: intake plenum switchover valve control.
P1740:Torque management request circuit.
P0115:ECT sensor circuit.
P50501: NO informations, mabe
I need the firing order for a 1998 cadillac catera
For the 1998 Cadillac Catera 3.0L DOHC V6:
Firing Order:
1-2-3-4-5-6
Cylinders:
........(back)........
|...5...|.......|...6...|
|...3...|.......|...4...|
|...1...|.......|...2...|
.........(front)
Igntion Coil Connections:
....(back)....
|..5...3...1..|
|..2...6...4..|
.....(front)
Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!
Not finding what you are looking for?