20 Most Recent 1993 Honda Accord Questions & Answers

My clock doesn't work in 1993 Honda Accord LX...where is the fuse located?

Question translated into written English :>D No you can reset the cluster. All the data to it comes from the ECM. Check your connectors.

https://www.ifixit.com/Answers/View/156364/How+to+do+valve+adjustment

how mach tayp 2000 hona accord head bolt specs

Take wires out of cigaret lighter , then replace fuse , if fuse stays ok without cigaret lighter connected then something shortning lighter inside.

not any more but be sure you put it the wright way or you will doing it all over again.

There's a website that has all this information about all this and manuals everything totally free there are many actually but I personally like few for now u can try reliable-store.... let me know if u need help thanks

its a three step process 1st 29ft/lbs 2nd 51ft/lbs 3rd 72.3ft/lbs

I suggest you try one of those instant download manuals. My brother ( a mechanic) buys it when he can't fix some technical issue He buys from www.reliable-store.com . A lot of mechanics actually do this. Website is very good for this. Must try it !!

If the engine cranks over but wont start, the Hondas in that year range have a pretty good size relay under the drivers side of the dash, its about 1 1/2" by 2 1/2' you can replace it or just take the cover off and if you look at the solder contacts very closely you will see one or two that have a crack around them. just put a couple of drops of solder on them to fix the bad connection and you will be on your way. literally takes about 10 minutes start to finish

The lock is easy to replace. Buy a new one.

Junk and grime can get down in your shifter . U need check out how to take the shifter top off clean where the button goes down that connects to a rod that moves down and allows you to shift . The clicks u hear may be the end of rod not moving down far enough so it is clicking in and out of ever groove in the assembly . There is a groove for each gear that keeps it in place . Look on u tube for videos of this and I'm sure it will help .

Hi if I recall on the trans, it has been about 15 years since I worked for the Honda dealer, But if I remember correctly it sounds like you lost the 2-4 trains pack the housing on the pack would crack over time , causing metal fragments to travel all throughout the trains, if this is the case the only real fix is to have it rebuilt, if it where my car I would look for a used trans, this will coast You a whole lot less, or it maybe time for a new or used car, again I has been quite a while , but this is my best guess good luck I hope this helps.

If you can trust your mechanic he should guarantee that it works for that kind of money. I would talk to him and let him know what it is doing. Do not get angry when telling him and just maybe he can fix it. It could be a simple fix. I have had things like that happen .If a computer is involved might be a sensor.

Hi It seems like gearbox need looking into

I had this happen on another car and it turned out to be a loose connection on the tacho wiring. Fixing the poor connection fixed the problem.