20 Most Recent
1997 Lexus ES 300 - Page 5 Questions & Answers
AIR CONDITIONER
Could be a list of things including low on freon, low pressure switch, relay, or the a/c clutch on the compressor.
The Lexus car remote key control model ES300
try this:
1. Start with key out of ignition, drivers door is open all others closed and
drivers door is unlocked.
2. Insert key into the ignition (DO NOT Turn) and Pull key out.
3. Perform these steps within 40 seconds.
A. Using the power lock switch on the drivers door, perform 5 lock/unlock cycles
starting with lock. Use an even pace and try to go about one cycle per second.
(1Cycle = 1 lock and 1 unlock).
B. Close, then open drivers door.
4. Perform these steps within 40 seconds.
A. Using the power lock switch on the drivers door, perform 5 lock/unlock cycles
starting with lock. Use an even pace and try to go about one cycle per second.
(1Cycle = 1 lock and 1 unlock).
B. Insert the key in the ignition cylinder.
C. Turn the ignition to ON (Do NOT Start) then back to OFF.
D. Remove the key from the ignition.
5. Press any button on remote for a minimum of 1 second.
System should now lock and unlock doors once.
6. Close and open drivers door.
7. Press any button on remote for a minimum of 1 second. System should now lock and
unlock doors. Once to confirm programming, twice to indicate programming failed.
8. Repeat steps 5, 6 and 7 for additional remotes.
Driver side door removal of 1997 lexus es 300
Gently don't force anything. 1st check for any visible screws on door trim & undo. remove window winder if not power window you can buy a tool for this. carfully pull the trim out from the bottom of the door & work up. You will probably find it stops near the door handle. There is probably hidden screws behind the inner door handle trim & don't forget arm rests. just be gentle & yu should work it out & not brake anything
What does it mean when the discharge warning light comes on
Hi: I would first check all the fuses to the CPU and fuel pump. If everything OK , then I would run the codes. Surely it set some code when it quit. Didi you check for ignition and power to fuel pump. Can you hear the fuel pump when you try to start the engine?Let us know what you find. Robert
Not finding what you are looking for?