20 Most Recent
2001 Lexus IS 300 - Page 8 Questions & Answers
My husband passed away on
- You are being charged each month becuase you or your husband took out a monthly subscription to our service, this monthly fee allows you to ask unlimited repair questions for one monthly fee. If you wish to cancel this monthly subscription simply send an email to Fixya.com at this email address:
[email protected]
- Tell them to cancel the monthly subscription to our service.
- I can
Abs, brake won't go off,
The ABS system and TRAC system are very similar. Signals from the speed sensors in the wheel hubs and one on the output shaft of the transmission are checked against each other. If when you apply the brake a wheel is detected as running much slower than the others brake fluid is relieved from this wheel to stop it skidding. Likewise when you accelerate the speed sensors detect a wheel speeding up faster than the rest and the brake is applied to it to gain traction control. So you can see that the speed sensor operation and their signals are central to both ABS and TRAC. If you have a problem with one then you invariably have a problem with the other. You need to check that the speed sensors to the wheel hubs are intact, that the connections are good and that the wiring has continuity. Also check the speed sensor on the side of the output shaft on the transmission casing, the connection and continuity. If any part is loose this will be enough to upset the complete system.
My 2002 lexus Is300 is
PLS DO A COMPRESION TEST THEN YOU WILL KNOW IF YOU NEED TO REPLACE YOUR PISTONRINGS OR REDUE THE VALVE SEALS AGAIN
How to maintain long life starter year and years
first of all repair your starter if old change brass and clean starter, if you got new car here's the tips to take longer life starter,always check stater for oil leak from engine to avoid short circuit always protect terminal positve and solinoid to the starter or put silicone to cover terminal protect from oil and water,during start cranking engine always released immediately when the engine start the key on crank position to avoid damage brass from the starter,dont try to punch hammer the stater or any metal to avoid damage magnetic core in the starter
Tail lights are out but
Check the bulbs, If one burns out it sometimes breaks the current flow and both stop working, Raz
Yes I still need help.
What area do you need help in I am sorry i only see " Yes I still need help. I have a mobile mechanic coming over at one oclock. I will tell him your solution. I had the alternator and starter checked last week. Do I need to replace the wires to the battery. If so is there any special part or tool the mechanic needs or is there any thing in particular he needs to know in order to replace it?"
I would love to help give me the area in need of repair and the specifics. Thanks, Lee Davidian
Hi, I have IS 300
Check the voltage of the battery first. If you are under 11 volts you have a charging issue. Most likely though, if your lights are working at full power it is your starter.
Turbo
let me know if you want new or used and where you are located i find car parts as a profession, especially hard to find stuff
Not finding what you are looking for?
