20 Most Recent 2006 Honda Accord - Page 8 Questions & Answers

What is it you are trying to unlock? radio code, the doors, trunk what. need more information

Call a Honda dealer

Try this If its for a radio thats 2002 or older you will need the radio serial number in order to obtain the radio code. to do this you will turn the ignition on and the radio off. then push the 1 and 6 buttion at the same time. while holdting the buttons turn the radio on and u should show a code that begins with a U or a L. Write all numbers down. then contact the honda dealer for the code to your audio system. If you already have the code....do the following. Turn your ignition to ACC or on to power on thyour radio. Enter the radio anti-theft code using the prest buttons at the botton of your radio. For example, if your anti-theft code is 55512, "You would press the 5 button three times, then the 1 button, then the 2 button. this will unlock and rest your honda radio.

If for a radio thats 2002 or older you will need the radio serial number in order to obtain the radio code. to do this you will turn the ignition on and the radio off. then push the 1 and 6 buttion at the same time. while holdting the buttons turn the radio on and u should show a code that begins with a U or a L. Write all numbers down. then contact the honda dealer for the code to your audio system. If you already have the code....do the following. Turn your ignition to ACC or on to power on thyour radio. Enter the radio anti-theft code using the prest buttons at the botton of your radio. For example, if your anti-theft code is 55512, "You would press the 5 button three times, then the 1 button, then the 2 button. this will unlock and rest your honda radio.

P0715 MITSUBISHI - Input/Turbine Speed Sensor Circuit Malfunction? ' Add Commenthttp://engine-codes.com/p0715_mitsubishi.htmlForum CodePossible causes - Transmission speed sensor circuit is open or shorted- Transmission speed sensor circuit poor electrical connection- Faulty transmission speed sensor Help with thisWhen is the code detected?Diagnostic Trouble Code (DTC) P0715 is detected when TCM or ECM does not receive the proper signal from the sensor.Symptoms- Engine Light ON (or Service Engine Soon Warning Light)- Possible shifting problemsP0715 MITSUBISHI Description The input speed sensor detects the primary pulley revolution speed and sends a signal to the Transmission Control Module (TCM) and Engine Control Module (ECM). Need more help?Do you need more help with the P0715 MITSUBISHI code? ask a question to our users or search the top hand picked automotive forums for more informationRead more: http://engine-codes.com/p0715_mitsubishi.html#ixzz2QYRb9YyuFollow us: EngineCodes on Facebook

*Turn the key to the run position*Push the trip/odo button until the service is displayed.*Push and hold the trip/odo button for about ten seconds, the service reminder will start to blink.*Release the button and immediately press and hold it again for another 10 seconds or until the service reminder resets. I’m happy to assist further over the phone at https://www.6ya.com/expert/jeremy_d728a59f986299fa

P0705 Transmission Range Sensor Circuit malfunction (PRNDL Input). It means something is wrong this sensor, take your car to a Transmission Shop to further diagnose the problem.

Depending on the indicator rapid acceleration will downshift for passing this is normal.

Your mechanic did not reset the maintenance indicator on the last oil change. You just need to reset the maintenance light.

I will admit that this is not a solution to your problem but may help until you get it fixed. Many people sometimes forget that the ignition key can unlock the doors from the outside manually. Worth a try rather than crawling in through the trunk.