20 Most Recent 2003 Isuzu Rodeo Questions & Answers

Question edited for clarity, add maker. Question moved to model category. The is no 'EDM' fuse. Do you mean 'ECM'? Engine Control Module, the engine main computer that makes everything work.

Isuzu Rodeo / Amigo (1998-2004) fuses and relays

Fuse-Box.info https://fuse-box.info > isuzu > isuzu-rodeo-amigo-199... Here you will find fuse box diagrams of Isuzu Rodeo / Amigo 1998, 1999, 2000, 2001, 2002, 2003 and 2004, get information about the location of the fuse ... ..

Is there a torque rating for the engine coolant temp sensor for the 05 elantra gtSorry I to am needing a spec but I can't find my way to the asking??

first place to check is the cat converter

Hook it to a scanner to see what the code is

My brother has a Holden captiva 09, my brother put petrol instead of diesel, lucky he didn't start the car I was wondering how to drain the fuel if it doesn't have a drain plug??

Are you getting voltage at tail lights check earth connections too.

sounds like you have water in the fuel, put in a some dry gas and let it sit over night then drive it the next day to see if it improves

Check the coils, there may be a bad coil. That lets moisture in it, and causes the engine to mis fire. God-Bless! Its worth a try!

get car fixed, that is what CEL on means, and codes mean. if you want to learn car repair read the book? are you asking for use to teach you 50 years school and experiences in a 3 inch text box. , really? 1312 just one code, and weak engine, misfiring or bogging ? 3.2L, 2 cams or 4, the 4 cam is 6vd1W engine. Ignition current Sense System Secondary Line #2 Circuit, Confirmed this engine has 6 COPS, (coils over plugs) so... ever get a full tune up in last decade,? bad spark plug #2 bad spark coil #2 for sure I dont know what engine you have, no photo of if nor VIN code 8th digit telling me this key fact. if you had, id be more accurate left front coil bad or spark plug or omg the boot on it bad $1.49 spark plug $15 boot $150 coil the cheapone is the tune up part, what say do that first? its a spark plasma code, the high voltage plasma is weak. (fancy DTC this) like my jeeps have.

double posted why?

You need a special tool to do this.

hey how weird is that, i am a MECHANIC and just fixed this VERY same issue 2day.

Have the glow plugs checked, it is my guess one or more is burned out.

find the dead short in the fuel pump circuit or pump itself test by removing the power wire from the pump and see if the fuse blows .if it does it is a wire / relay problem if not then it is the pump itself

25 days old.?? car has 4 wheels, must be guess end of car? 2wd or 4wd, yup , be different. why not just log in to mitchells DIY and end the saga... google it) ill toss coin for you, lands heads, for front. front wheel bearings. 2wd

1. Before servicing the vehicle, refer to the Precautions Section.
2. Raise and support the front end.
3. Remove the caliper from the anchor plate and suspend it out of the way.
4. Disconnect the ABS sensor.
5. Remove the rotor.
6. Remove the bolts attaching the hub to the knuckle.
7. Installation is the reverse of removal. Torque the hub bolts to 76 ft. lbs. (103 Nm).

4wd:

1. Before servicing the vehicle, refer to the Precautions Section.
2. Place the transfer case in 2WD.
3. Raise and support the front end.
4. Remove the caliper from the anchor plate and suspend it out of the way.
5. Remove the rotor.
6. Loosen the caulking around the front driveshaft nuts. Remove the nuts and discard them.
7. Remove the 4 hub retaining bolts. NOTE If the hub is difficult to remove, install 2 long bolt in the bolt holes and strike them to loosen the hub.
8. Installation is the reverse of removal. Torque the hub bolts to 76 ft. lbs. (103 Nm). Use new driveshaft nuts, torquing them to 181 ft. lbs. (245 Nm). Apply new caulking. The caulk should be free of cracks when applied.

for better result download the pdf file 2003 2008 Isuzu Holden Rodeo Workshop Service Repair Manual Download

Auxilliary??