20 Most Recent 2004 Infiniti Q45 - Page 2 Questions & Answers

repairing the light on the analog clock of a 2002 infinity Q45
i want ti know which model should i buy (bulbs burned)

well i dont think its a major job but i think the feed pipe could be leaking ,when the oil is under pressure its closing up a union somewhere ,but when pressure drops it leaks ,couldnt tell you where or how without a good inspection ,could evan be the rack and pinion but without a good look ?? .Anyway if your good with computers you could always answer a few questions on here to help out ??

I had to take my to Infiniti...code B1049: for open in drivers air bag module. They replaced drivers air bag module and clock spring...there is a third piece associated with that problem, but I did not need it because the light stayed off after they cleared the code

Hello lsatter1.

Certainly it may have a sensor circuit issue.
But the mechanic if he has the capability to diagnose your ABS would have found that before the conclusion of the ABS pump.
If your mechanic is trusted and has treated you well in the past perhaps you will have to go along with it.
But if you have doubts, another opinion by a qualified shop is recommended.

Your infinity has a computer capable of storing codes related to ABS systems.The code(s) stored will direct the mechanic towards the area of concern. Ask what codes were stored, then look it up or ask me here.
If the guy that is working on your car does not have these tools to access these codes, pull it out of there.

Thank you for using FixYa.

KL

YOU HAVE A MODULE PROBLEM THAT IS SHORTING OUT AND TRIGGERING ACCESSORIES CIRCUIT HAVE IT CHECK ''CAN SHORT CIRCUIT AND CAUSE FIRE''

yes it is the only way to get to the headlamp to take it out

I have the ABS/SLIP/TCS OFF light problem and solved it by replacing the ABS integrated relay module. It sits above the ABS actuator which is located just in front of the passenger side of the firewall and it has 3 connectors exiting the module and one attaching screw at the top.

I have no idea what might be causing your other issues.

These are sealed units so if a new light bulb is needed change it from the back side of the headlamp assembly

check your relay.if the relay is not defective,check your switch.