20 Most Recent 2003 Land Rover Freelander - Page 7 Questions & Answers

Get the service manual made by Haynes for your 2003 Freelander. I do not know what manual you are using, but if the valves are hitting, the marks on the timing gears were NOT aligned properly before the timing chain was put on! Be sure you don't try to start the engine until you follow the EXACT procedure...competent or not!

I think you just have to remove the panel inside the truck. Look right behind the light on the inside and you will see a hatch door. Let me know how you make out

sounds like the O2 sensore in the exsos

dealer will give you code. they should not charge you for this info.

as much as it may cost ring the manufacturer and tell them the vin number they will be able to tell u the code

Sounds like a blown head gasket.

they should be labeled either on the block or the intake

Remove

1. Disconnect battery earth lead.
2. Remove engine acoustic cover.

1. RH bank only: Release locking clips and disconnect multiplugs from plug top coils.
2. RH bank only: Remove 6 bolts securing plug top coils to RH camshaft cover and remove coils.

1. LH bank only: Noting their fitted positions, disconnect ht leads.
2. Using a 16 mm plug socket, remove spark plugs from both cylinder heads.

Refit

1. Set gap of each new spark plug to 1.00 mm .
2. Fit spark plugs and tighten to 25 Nm (18 lbf.ft) .
3. LH bank only: Connect ht leads.
4. RH bank only: Fit plug top coils to spark plugs.
5. RH bank only: Fit bolts securing plug top coils to RH camshaft cover and tighten to 9 Nm (6.5 lbf.ft) .
6. RH bank only: Connect multiplugs to plug top coils and secure with locking clips.
7. Fit engine acoustic cover.
8. Connect battery earth lead.

Replace the engine mount & then work on noises

You may have this posted in the wrong product category. Please select another category appropriate to the problem and re-post the problem so the correct expert will see and respond to the question.. This is for car and truck problems. This post can't be removed or moved, please re-post the question in the correct product category. Thanks

electric fans only run when it needs to. There should be a Thermal switch on the radiator. Short that switch to Ground and fans should run. Turn On AC and one fan should run.