2004 Hyundai Tiburon - Answered Questions & Fixed issues


It is located in driver's side in engine bay. Square box . This cutoff is a safety device to stop the fuel pump on case of impact.

2004 Hyundai... | Answered on Oct 03, 2019 | 16 views


Wiring, schematic, electrical diagrams, fuse diag, error codes, torque settings etc are basic contents of these online books they have here on this website www.reliable-store.com I have attached. Must check it out

2004 Hyundai... | Answered on Mar 14, 2018 | 88 views


Only thing that could have it stuck is pressure against the gears from vehicle weight parked on an incline. Get the clutch bled first, this will do the trick. Fill the clutch master cylinder and with the bleeders closed, you'll be able to get enough of a pedal for the clutch to work.

2004 Hyundai... | Answered on Dec 05, 2017 | 86 views


sounds like the multi function switch is faulty

2004 Hyundai... | Answered on Dec 05, 2017 | 119 views


Hey Alexis,
Sounds like your thermostat is stuck.. they cause the symptoms you describe... they are inexpensive in replace,, Have your coolant system flushed and refilled with fresh antifreeze/coolant.

2004 Hyundai... | Answered on Jul 05, 2017 | 180 views


Check 10A FUSE 9 in the body control module box.

2004 Hyundai... | Answered on Jul 03, 2017 | 323 views


You need an auto electrician to repair any damage done to the wiring.

2004 Hyundai... | Answered on Mar 07, 2017 | 506 views


The drain tube is called the AC System "condensate drain" the drain tube exits under the car on the passenger side at the base of the fire wall, it is about 1/2" in diameter.

2004 Hyundai... | Answered on Nov 26, 2016 | 32 views


Yes cam sensor can have that effect. The management system needs to know which stroke the timing cylinder is on - the crank sensor supplies information about crank angle and the cam sensor tells it which stroke it is on.

2004 Hyundai... | Answered on Mar 27, 2016 | 66 views


Not the cam sensor, the crank sensor would do this.

2004 Hyundai... | Answered on Mar 27, 2016 | 35 views


If you paid at a legit shop, take it back. It is still under warranty.

2004 Hyundai... | Answered on Aug 17, 2015 | 116 views


I don't think we are quite understanding the problem. Have someone drive it and determine what is wrong. You cannot disconnect the TC without removing the trans and I guess this isn't what you mean?

2004 Hyundai... | Answered on Apr 27, 2015 | 87 views


different vehicle similar steps

2004 Hyundai... | Answered on Apr 15, 2015 | 49 views


This is bad news either way, whether you have a manual or automatic transmission. The transmission is slipping if it an automatic or your clutch is worn out if it is a manual transmission.
Assuming you have an automatic, is may be the transmission is slipping because the transmission is not quickly shifting gears.

If you transmission shifts using hydraulic valves, there may be hope. You can add a can of SeaFoam transmission oil or similar product that helps stuck valves move. If you have solenoids used to shift the transmission based on motor RPM and pressure sensors, you need to go to a transmission shop to run more complicated tests. In that case, go to someone who is familiar with your vehicle model.

2004 Hyundai... | Answered on Feb 12, 2015 | 153 views


This is most likely your "Valet" alarm disable switch. Use to disable your car alarm so you can keep your Alarm Fob and let a Valet, mechanic, friend etc. operate the car without the alarm being functional. If it is an after market alarm, consult the mfg's manual, if OEM contact dealer for operating instructions.

2004 Hyundai... | Answered on Jan 06, 2015 | 732 views


remove tail light assembly replace bulb reinstall assembly

2004 Hyundai... | Answered on May 19, 2014 | 66 views


Most likely in the trunk behind the carpeting or a little door you will find some screws/bolts to take out to remove the light fixture the have access to replace the bulb.

2004 Hyundai... | Answered on May 05, 2014 | 23 views


At the starter relay, you have two red or purple wires, one goes to the starter and the other comes from a 30amp fuseable link. Is that fuseable link circuit hot ?
From the key switch, power goes thru the alarm relay, then the clutch safety switch or automatic selector switch, then to the starter relay. The fourth wire on the starter relay is a ground.
You should be able to put power to the starter relay on the white or yellow wire coming from the safety switch to make the relay engage.
My guess is something wrong with the alarm system.

2004 Hyundai... | Answered on Mar 02, 2014 | 450 views


Most car companies recommend replacement on or before 80,000 miles. Both the 4 cyl and V6 engines are interference style which means the valves can be damaged if the belt breaks while the engine is running.

2004 Hyundai... | Answered on Jan 20, 2014 | 58 views


replace the turn signal 'Clicker' also known as the turn signal relay. Most likely the problem unless you have a really wierd electical issue that will be hard to isolate...

Peace,

2004 Hyundai... | Answered on Feb 07, 2014 | 1,472 views

Not finding what you are looking for?
2004 Hyundai Tiburon Logo

297 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Hyundai Experts

Marvin
Marvin

Level 3 Expert

85222 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...