It truly isn’t that hard! 4 screws. More than likely do not have a wheel puller. Instead of dragging this out if you have any AutoZone next to you they loaned tools for free tell them what you’re doing and that you need a wheel puller they will break down much faster than I can give it to you on this good luck my friend

1992 Toyota... | Answered on Jan 28, 2018

1 Answer

Clutch pedal very stiff, goes in out, dont' grab....

You can go to this link. It's a website sells manuals and honestly, since I've bought one from them, I didn't need further help. I have chrysler 2002 and it almost broke down but I got a $9 manual, and it's perfectly fine now.
My personal recommendation! Best Manuals

1992 Toyota... | Answered on Dec 17, 2017

0 Answers

My 92 4runner is haveing a power assisted brake problem

1992 Toyota... | Posted on Sep 05, 2017 | Be the first to answer

1 Answer

1992 Hilux surf turbo not running properly

take it to an accredited turbo repair shop for a proper diagnosis and quote

1992 Toyota... | Answered on Jul 13, 2017

2 Answers

1992 toyota 3.0 v6. lost power and gas milage instantly

check for a failed cat converter
run the fault codes as items that look good seldom are

1992 Toyota... | Answered on Mar 25, 2017

0 Answers

Ware is the ground wire for the speedometer located on a 92 4runner v6 auto 4x4

1992 Toyota... | Posted on Jan 11, 2017 | Be the first to answer

0 Answers

I need torque specs on 92 4 Runner 3.0 cam Tower torque specs

1992 Toyota... | Posted on Oct 02, 2016 | Be the first to answer

1 Answer

92 4Runner automatic, runs great, put in drive, start down the road and at about 1850rpms cuts off.

Things to check first are fuel pressure and spark. Rig up something you can watch during a driveability (road) test. if neither of the two quits working when the engine dies, check for correct ignition timing (and advance) and injector pulses at the injectors.since the engine idles, the problem is probably not a tired engine, but possibly a sketchy sensor (crankshaft or camshaft position), engine computer, or spark controller. Not so expensive to replace, but no fun to troubleshoot.

1992 Toyota... | Answered on Jul 29, 2016

1 Answer

I have no dash lights. Checked the fuses and there was no burnt one . The only thing that works is my turn signals, p-brake, and check engine

Check relays.

1992 Toyota... | Answered on Jul 14, 2016

0 Answers

1 Answer

3.0l. Where is IAC valve located?

Air intake,black hose to engine ,be side TPS.

1992 Toyota... | Answered on Oct 12, 2015

2 Answers

I have a 1992 Toyota 4 runner and it keeps blowing the break light fuse and the turn signal fuse. I have checked all the basic things and I'm at a lose as to what it could be. Any suggestions?

start by making sure all bulbs are good for all lights if one is shorted that can cause your problem, the other are any of the bulb sockets corroded or green,chaffed wires,could water be a problem ?

1992 Toyota... | Answered on Jul 08, 2015

2 Answers