BRAKE PEDAL GETS HARD WHILE BREAKING
brake switch bad, system needs bled, rear brake circuit probably has air in fluid, fluid is no doubt contaminated, nobody addresses this maintainance problem, bleed entire brake system, replace all fluid w/ new. if fluid in the master cylinder is black, seals are bad, some brake systems have a pump as part of master cylinder, these pumps run off fuses , 25amp, etc., check what system you have. is your fluid level correct ? the switch I refer to is @ proportioning valve below master cylinder @ frame, see abs brakes use this valve to prevent skidding, rear brakes must come on first, before front brakes. if valve is not in balance a hard brake pedal occurs, as with low fluid levels. does your brake light come on ? @ dash. have a brake shop bleed your system, if there's a problem they'll find it for you, let them do it, don't wast your time.