20 Most Recent
Questions & Answers
I have a .041 amp
The ECU-B fuse supplies voltage directly to the computer (ECM), .041A is 41 milliamps and normal draw for the computer to keep it's memory.
on Dec 09, 2017
Manual transmission parts:
- Manual transmission, 5-Speed.
- ECM Engine Control, M/T.
- Transmission oil SAE 75W85, 2.5 Litres.
- Clutch pedal assembly.
- Gear lever assembly, with console.
- Gear lever cable set.
- Gear lever boot.
on Oct 25, 2017
How do I test the igniter on 1996 corolla 4afe motor
Start the car and lift up the coil inserts from the spark plugs one by one. By doing so if the engine does not stall that cylinder has a problem. The problem may be due to the defective igniter, fuel injector, high tension cord, weak cylinder compression or a distributor assembly. Some models have distributor less ignition system.
To check the igniter check the 12V at the input lead which is entering the igniter amplifier in the distributor and the output voltage at the spark plug wire. If it is so the igniter is ok. If it is not starting at all or is giving intermittent problem, replace the distributor assembly.
on May 02, 2017
I had to replace my left front brakes at 27,000
I'm sorry to hear you are having this problem you shouldn't be after brake pad replacement .
This sounds more like the vehicle was in some kind of accident front end and it bent the axle or the cv joint is damaged .
Look at the brake pad the next time you have it repaired the ware on the pad should be even so the ware part on the pad should be flat if one side is thicker then the other it would be noticeable it means the axle is not spinning true its wobbling .Try taking it to a different shop something else is wrong and its making this happen
on Mar 10, 2017
Not finding what you are looking for?