2000 Toyota Corolla - Answered Questions & Fixed issues
Engine knock
The idle issue is normal. The idle is controlled by the ECU. There are no adjustments for the idle. Regarding the knocking noise, that could be several things, and I am hesitant to comment without hearing it. Take it to a Toyota Dealer & have a tech listen to it. We are very good at identifying noises on the service drive.
2/4/2022 4:22:35 PM •
2000 Toyota...
•
Answered
on Feb 04, 2022
•
1,285 views
Car cutting even after changing petrol pump + filter
Is the check engine light on? Check your trouble codes. PO171 would indicate a leaky intake manifold gasket. The gasket between the throttle body and the manifold is also a known issue on these engines. That will cause the engine to cut out or die when the fuel pedal is pressed. parts.olathetoyota.com/toyota-engine-trouble-codes
9/7/2021 9:07:46 PM •
2000 Toyota...
•
Answered
on Sep 07, 2021
•
145 views
2000 Toyota Corolla VE -- Glove Box Stuck
The most common cause is something inside the glove box jammed in the latch. Push glove box door release , and GENTLY insert a flat putty knife, plastic knife, or similar type tool in the groove of door, GENTLY try to pry open the door. U will probably (hopefully) find a napkin, map, or glove (does anybody actually put gloves in the glove box?) jammed in the inside latch. Let me know how u make out.
2/9/2020 11:40:06 PM •
2000 Toyota...
•
Answered
on Feb 09, 2020
•
3,055 views
2000 Toyota Corolla ground wiring diagram
you can get guide from many sites.. i know few
error codes/ fault codes, wiring diagrams, schematic diagrams, torque specs, engine info, switches functioning, assemble, disassembly, complete refurbish, repair, installation every single thing is covered
2/9/2019 9:39:54 AM •
2000 Toyota...
•
Answered
on Feb 09, 2019
•
1,046 views
Toyota corola 5a-fe car back fires and has no power
the only thing that can make it backfire is a malfunction in the fire to the engine could be coil plugs distributor cap or rotor make sure you check your timing with a light and check codes if any showing
1/30/2018 4:10:29 AM •
2000 Toyota...
•
Answered
on Jan 30, 2018
•
323 views
Fuel filter location
it is usually mounted on to the top of the fuel tank accessible from under the back seat good luck
1/30/2018 4:02:40 AM •
2000 Toyota...
•
Answered
on Jan 30, 2018
•
142 views
Hi I'm Rishan from Sri Lanka. The fuel consumption
Please do the following:
- Check and adjust the valve clearance.
- Check the valve timing. Timing belt may have jumped a tooth or it may have wrongly be installed.
- Adjust the ignition timing with strobe light to 8 degrees before top dead center with the map sensor pipe be removed (if it is a distributor type ignition system).
6/3/2017 12:29:05 AM •
2000 Toyota...
•
Answered
on Jun 03, 2017
•
130 views
Not finding what you are looking for?