20 Most Recent 2006 Toyota Matrix Questions & Answers

The ignition switch is the what you put your key in. Technically speaking the Ignition Cylinder is what you put the key and the switch is the sensor connected to the cylinder the tells the module what position the key is in

your in limp mode and will need repair work first the following links are your codes with repair assistance P0101 MAF Circuit Range Performance https://www.obd-codes.com/p0102 https://www.obd-codes.com/p0113

One hour plus part.Find should say windshield washer.

Need to replace odometer

-Good. Good Luck Mai

You have several ground wires on the transmission. 2 or 3 coming out of the harness and one big one going from the transmission to the body. Make sure they are secure.

Nothing can be done unless you get the system scanned with a diagnostic computer and put the output codes here. I will put every effort to help you. Thanks.

Hello, there are two sensors, an air/ fuel ratio sensor and an oxygen sensor, the #1 or a/f sensor is in the exhaust manifold near the firewall, the #2 or oxygen sensor is behind the catalytic converter.

For bower fan check: - Speed controller assembly of blower fan. - Wiring harness and fuse - Blower fan. To solve the air bag light problem retrieve the SRS error codes with the help of diagnostic computer and follow the description. You can also check the error codes manually as described below. Procedure: Read the blinking patterns of the DTCs. As examples, the blinking patterns for the normal system code and DTCs 11 and 31 are shown in the following diagram. The first blinking pattern indicates the first digit DTC. The second blinking pattern occurs after a 1.5-second pause. If there are two or more DTCs, there is a 2.5- second pause between each DTC. After all DTCs are shown, there is a 4.0-second pause, and they are all repeated. HINT: • If 2 or more malfunctions are found, the indication begins with the lowest numbered DTC.

did you google that. here ill do that for you. 1st hit of over 2million, http://www.ehow.com/how_7650026_reset-toyota-matrix-car-alarm.html