Tip & How-To about Chevrolet Cars & Trucks

How to change a battery on a Chevrolet pickup

Chevrolet Key Fob Remote Battery Replacement

  1. Insert flathead screwdriver into a small slot on the side of the key fob and twist to open.
  2. Slide out the current battery, and replace it with a new CR2032 button cell battery, paying attention to the positive side.
  3. Press the key fob back together, and all should be set!















Posted by on

Cars & Trucks Logo

Related Topics:

Related Questions:

1 Answer

how to remove battery in 2008 cts remote


Replacing The Battery In Your Cadillac Key Fob Replacing the battery before it dies will save you from having to replace the fob, reprogram it, and, if nothing else, getting stuck on the side of the road. Find the seam on the side of the fob and, using a small flathead screwdriver, pry the seam open on both sides. Take the cover off, remove the circuit board - use the screwdriver to pop it out - and swap the batteries out. Then close the case back together, and you're done. It's really simple; just be careful with the circuit board and battery contact while you're in there.

Jun 22, 2017 | Cars & Trucks

1 Answer

How do you open the remote to change the battery


VW Remote Key Battery Replacement Quick Easy Here is a link for a video to help you. You'll need a flathead screwdriver to open up the key fob.

Jul 19, 2016 | 2008 Volkswagen Polo Classic

2 Answers

How do I replace the battery on a key remote for a Mazda cx9 year 2012


Flip open key. With small tweezers, file, or jewellers screwdriver, depress release button found in key-slot (near the end of the fob with the key on it. Pull two halves of fob apart. Separate the remaining fob in half again (the part without the key) by prying in the slot on the open end. Replace battery. Reassemble.

Jan 27, 2015 | Mazda CX9 Cars & Trucks

1 Answer

need to change the hand-set remote battery


To replace the battery:
1. Press the button to flip out the key.
2. Turn the key fob so the metal key stick out to the right and the channel that the key fits into is facing you. (The VW logo on the fob will be facing up)
3. Look closely inside the channel. It is split vertically. On the left hand side of the vertical split, it is also split horizontally.
4. Insert a flat blade screwdriver into the horizontal split and twist. They key fob will come apart, revealing the battery.
5. The replacement battery is a 3 volt CR2032 'button cell' and is commonly available.
6. Replace the battery with the + side facing down.

Oct 26, 2009 | 2000 Volkswagen Beetle

1 Answer

Can you replace the battery in an RX8 keyfob? If so how do you open the FOB. I've managed to seperate the key from the alarm but I can see no obvious place to get to the battery.


Assuming you're talking of the key fob, separate to the key (earlier version), then my Owners Manual, page 3-5 describes...

"1. Insert a small screwdriver into the slot and gently pry open the transmitter."

(refers to a slot on the side of the fob where the keyring is held)

Replacement is a CR2025


Sep 17, 2009 | Mazda RX-8 Cars & Trucks

Not finding what you are looking for?

419 people viewed this tip

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

Marvin
Marvin

Level 3 Expert

85216 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Loading...