Tip & How-To about Chevrolet Nova

1972 Chevrolet Nova wiring

This is the wiring diagram for a 72 Chevy Nova. Everything that's needed to get the engine electrical up and running.
Eng. is the engine bay wiring.
B - battery
S - starter
C - coil
D - distributor
R - regulator
A - Alternator
H - horn relay
T - temperature switch
O - oil pressure switch


Int. is the interior wiring for the engine.
Ign. - Ignition
N - Clutch/Neutral safety switch
T - Temperature guage
O - Oil light
C - Charge light


Posted by on

Cars & Trucks Logo

Related Topics:

Related Questions:

0helpful
1answer

Need a wiring diagram for a 1995 Chevy Silverado for the headlight dimmer switch and for the radio. No dash lights but I have headlights. New switch did not fix it

check ALL FUSES FIRST IN CAB/ENG.BAY BOXES
ARE PARK LAMPS ALL GOOD OUTSIDE?

ENGINE RUn? ,DRIVEs.
SERVICE MANUAL COVERS ALL THIS./
0helpful
1answer

need a picture of a 1985 chevy nova fuse box diagram!

Google it. That will show you everything you need to see.
0helpful
1answer

looking for a 72 chevy nova wiring diagram in color on line for free so i can rewire the car from top to bottom

honestly have never seen a complete diag for anything older than 90 even in the manuals- for the time and headache factor would be easier to order a PAINLESS wiring harness- they make full kits for most everything
0helpful
1answer

Need 72 Nova wiring dash diagram

Go to faxonautoliterature. They can provide you with a wiring diagram direct from a GM service manual for your car for $8. I've used them before and had excellent service. Hope this helps.
0helpful
1answer

need wireing diagram to change 72 nova over to hei distributor

Hey , just take the positive wire from the coil you are removing and feed it to the + terminal on the HEI dist. cap.the other terminal under there is for your tachometer. If you are mounting a master kill switch in the bumper for drag racing- attatch the kill wire to the tach terminal also.
Thats it you just plug the three wire pigtail from the dist. base(pickup) to the cap and you are off.
Remember firing order is 18436572 in a clockwise direction. to find #1 remove #1 plug and have someone"bump" the engine over while holding your finger over the hole-carefull. then line up the slotted mark on the crank pulley with the big notch on the timing indicator. Good luck
Not finding what you are looking for?

10,929 views

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

john h

Level 3 Expert

29494 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Loading...