Tip & How-To about Chevrolet Silverado

Handy Automotive 12 volt tester.

Ever have an elctrical part on a vehicle that you needed to test without taking the part off the vehicle? I've been doing this for many years. Just about everybody who works on cars has a battery charger laying around. You can use the battery charger to apply voltage to activate whatever part needs testing. Just put the battery charger on the lowest amp setting, and clamp straightened out metal paperclips in the charger's alligator clips. Use these probes to apply voltage to switches, motors, light bulbs, whatever uses 12VoltsDC. By using an extension cord, it will reach anywhere on the venicle. And, if you have a portable battery charger/booster, you now have a mobile tester.

Posted by on

Cars & Trucks Logo

Related Topics:

Related Questions:

2 Answers

how do I change computer on 2002 Chrysler concorde

Changing the computer is easy , it's what comes next that is the difficult part . Changing computers requires programming the new one . Dealer only ! Special tools needed .
Looking at a wiring diagram to see what all is involved in the elctrical circuits would be a good first step . Then leaning how to trouble shoot automotive electrical systems would be good also. Do you know what a wiring diagram is ? How to read an interpret what's going on in the circuit ? How to do voltage drop testing on main B+ cable to the starter solenoid ? How to test the starter relay ( control side of the starter ) ? Free wiring diagrams here http://www.bbbind.com/free_tsb.html Enter vehicle info. year , make , model and engine size. Under system click on engine ,then under subsystem click on starting . Click the search button then the blue link.
Testing where the relay plug's into the fuse / relay box.

Relays Understanding Diagnosis and Testing Relayed Circuits Pt1
The starting motor relay in your vehicle is controlled by the PCM - engine computer . The PCM will supply a ground path for the coil side of the relay , if it see's an input fro the transmission range sensor switch, an there is no anti-theft system problem's . You can test at the relay for B+ voltage at two of the pin's an a ground through the starter an control from the PCM .
Starter Voltage Drop

Oct 22, 2017 | Chrysler Cars & Trucks

1 Answer

How can i tell if the thottle position sensor is bad without a multi meter and how do you adjust it when reinstalling

What make , model an year vehicle ? An engine size . Most TPS sensors are non adjustable . An you can't tell if it's bad without testing . Suggest you take your vehicle to a qualified repair shop that know how to test an replace a TPS , because i think your just guessing , looking for a magical fix .That's not how we repair automobiles .

Mar 21, 2017 | Cars & Trucks

2 Answers

hard starting

Spark Plugs--Changed every 3 years?

Ignition Wires or COP Coils original to car (2000) ?

Battery more than 4 years old & tested?

Fuel Pressure Checked-Before & during starting attempt?

Back probed & tested TPS Sensor?

Can't just drive any vehicle,they have to be in the shop
a couple times a year, to do preventative maintenance,look
at data & road test,shops don't do much,you have to educate
yourself & unfortunately it has come to the point that you have to
tell them what to do & only what you want done,no skills or talent
left in the auto trade & the technology has passed them by, for good

You do not need to touch a gas pedal, to start any car,in the last 30
years,they are all electronic & fuel injected

Apr 08, 2014 | 2000 Lincoln Continental

1 Answer

replacing ve commodore a/c evaperator

No-- this is a chat room or social web site,
we have no idea what the problem is ,or the
repairs required, without a vehicle to test

You need to do as you always have with all
vehicle issues & visit a repair shop to discuss
solutions & repair costs

Mar 15, 2014 | Cars & Trucks

2 Answers

I have a 2005 Pontiac Montana I turned it off and it would not start back all It did was go click click click click click and then it was totally dead I gotta jumpand it started right back up but when I stopped again for few minutes I needed a jump to get it started again what could be the problem

Maybe you have a battery problem? Make sure battery has a full charge, if the battery is down use a charger. Check battery connections and charging system.
Some of the national brand auto stores will check this for you.

Jan 23, 2018 | Cars & Trucks

Not finding what you are looking for?

510 people viewed this tip

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts


Level 3 Expert

85222 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions