The backup lights on my 1998 Chevy S10 won't come on when it's shifted to reverse. Lights and fuse are OK. Is it the switch on the transmission? How can I fix this?
Yes it screws in on right side of tramission and you will need a 7/8 inch deep socket to remove it. You may be able to clean the old one once it is removed. There is a little ball thatgets dirty and may you can get by with cleaning it. Good Luck. Ed
Back up lights for a 1991 Chevrolet S10 Blazer won't come on. Changed the bulbs, changed the switch and changed the fuse. Any other suggestions?
Chevy blazer back up lights wont work, checked bulbs, fuses, and changed part by transmission still wont work any other suggestions?
Had a trailer hitch installed and when put into reverse it would blow my back up light fuse. I then cut the female receptical out of the circiut and I don't have any back-up lights. Did they wire into my harness wrong to cause a short and if they did how can I find it?
6,033 views
Usually answered in minutes!
97 chevy blazer back up lights dont work tried replacing both bulbs and checked fuse and still nothing
back up lights wont work changed bulb and fuse. what now
Location of the reverse light switch on a 1989 Chevy K2500 automatic transmission
Dash panal lights not working
changed all bulbs, fuses, and the thing on the side of the transmission. Have no clue as to what else it could be. Please help.
no back up lights where is the plug that goes to transmission 05 freestar. transmission was worked on. lights worked before, not now.
I have a 1999 S10 truck 4 cylinder manual trans and caint find the switch on trans reverse lights don't work checked everything
×