At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Mar 6, 2013 - My wife told me that on occasion the headlights and the dash lights willblink when she lets off the. ... 2002 saturn l200 headlights and dash lights blinking.... 2000 LW2 dash lights Inop, spotts56, Saturn L Series Sedans & ...
My wagon 2003 l-300 has flickering lights and when the radio is off you can hear the ...My Dad has a 2002 Saturn Lw series wagon. the transmition has been ...
If you reset the monitor when you had the oil changed, and that light is for oil change due, the light should have stayed off.
Usually the wrench warning light is a service vehicle warning, not for oil change is due.
Your owners manual should explain each warning light.
You may have to get the body computer checked out by a shop or the dealer.
You should be able to have an auto parts store check the engine computer for trouble codes. The codes would direct a mechanic as to what to check next.
Forget the dealer
You get a check light.leave it,and go to a shop to scan it for the code.Then have them diagnose from there and repair.
You have system malfunctions on both vehicles.
Hello. this is a warning indicator. this light is on because there is either a problem with the engine control system, or even possiblity the abs unit. you will need to have the vehicle scanned for trouble codes to see why this light is coming on.
The SERVICE (Wrench) telltale is pulled to ground by the powertrain control module (PCM). When the lamp is pulled to ground, current from the ignition circuit flows through the indicator lamp, allowing it to come ON. The PCM will turn the SERVICE (Wrench) telltale ON for all non-emission related DTCs that require that a telltale be turned ON (some DTCs do not turn on a telltale but are stored to aid in diagnosis).
The SERVICE (Wrench) telltale will also be turned ON if the ABS control module has detected a fault in its own warning indicator system. If the ABS system cannot turn on its own telltale, a message will be sent to the PCM through the class 2 data bus (circuit 1807) to turn on the SERVICE (Wrench) telltale.
The SERVICE (Wrench) telltale will be turned ON for 2-3 seconds when the ignition is turned to RUN for a bulb test.
Sound like your Throttle Position Sensor (TPS) has an issue. Check the wire leads first and if that is good, replace the TPS. A faulty TPS will give you a hard 1-2 shift and delayed shift on the higher gears at WOT. Good luck and keep me posted, be glad to know your car is running 100% again.
could be a blocked cat converter or a trans issue,,,usually a severe problem when the service wrench light comes on versus the service engine soon light, the wrench light means more important problem,,i would take it to delaer
it means you got a major engine or trans issue casuing the code to set causing the reduced ppower to come on and only giving your car part power"limp mode" so you can drive it to get it fixed, i would not drive it like that,go get it looked at
first problem, went to autozone. the guy that looked at your car was making pizzas last week. they pull codes and sell you every part you will buy. take the car to the saturn dealer and replace the bcm.
×