At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
When i turn the key over the cruise lite will come on an then go off with all the other gauges indicating there is still power to it but while driving down the road when u try to set the cruise the light wont come on an it wont work
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Could be a lose connection in the dash , more then likely . Who replaced the gauge an drive indicator ? The horn / cruise control /turn signals / radio all share a common ground point it looks like ,G203 G203
Behind upper LH side of I/P, near cowl
Maybe after gauge & drive indicator replacement connection became lose . None of these componets share a power supply (fuse) I can't send picture of the location of G- 203 sorry ! Instrument cluster would need to come out to see the ground .
Click on the link, part of cruise control circuit, you can see the fuses. Not only check the fuses, use a test lite to check voltage on fuse circuit, goes hot with key on.
Make sure the brake lites work?
Check applicable trouble codes relating to cruise control. There are other possible issues.
sounds like you have instrument cluster problem it probley has a short which would cause the security system to lock thinking that the van was being stolen i have has this problem before. hope this helps.
bad ground ..trace from bulb area back to fuse block with flashers...wire is shorting to ground or ground is loose.. good luck... also... my 05 ram had wrong sized gaskets around bulbs in back causing bulbs to not last til i discovered it not sealing out the elements and replaced
×