Need to find a repair manuel for 1987 Dodge Ram Charger transmission

Sorry but have no clue other than go under and start unbolting everything that holds the body to the chassis

you can clean a carby outside but that will not fix anything
take it to an accredited carby repair shop and have it done properly

Bernard's Blog: Dodge Transmission Output Speed Sensor

bernardsblog.blogspot.com/.../dodge-transmission-output-speed-sensor.h...

Sep 8, 2009 - My 99 Dodge 2500 Ram won't accelerate..transmission is NOT slipping,.... It has been running fine and the check engine light even cleared itself yesterday.... So it wouldn't go into first gear and then 3 minutes later my check engine ... I have a1997 Dodge Ram 1500 with a 5.9L instead of the stock 5.2L. It ...

Dodge Ram Idle and Stalling Problems - Car Forums at Edmunds.com

forums.edmunds.com > Dodge > Dodge Ram Pickup 1500

Aug 17, 2011 - 30 posts - ‎25 authors
Learn more about Dodge Ram Pickup 1500 at the Edmunds.com ... The crank sensorwas put on however it started stalling again. ... The truck starts fine, but will only runat 2000's RPM and only then if .... Then as I start driving about 1/3 of a mile go dead again, I knockout of gear, crank back up immediately.

WILL NOT GO OVER 30MPH WITH PEDLE TO METAL ...

repairpal.com > Questions > Dodge > Charger > 2006 Dodge Charger

I WAS DRIVING FINE AND THE CAR ACTED LIKE IT GOT STUCK IN ... Then the transmission didn't want to change into 2nd gear. .... Whenever i start up my car theabs and esp light turn on and when i try driving it doesnt go over 30 mph even .... in neutral but not it just wont go up hills and i think it has something to do with

Chk the battery connections, take them off and clean terminals. Chk the starter motor conections and repeat above. chk the fuses in the engine bay.cheers

Thermostart

Go to freemanuals.com on the web. They may have yours

check with autozone they have a manuel that can help

You will have to refer to the id on the pan or on a tag on the transmission. There is the 727,904,and the 999.

to whom this may concern did you find a steering column. Are you replacing it in a 1987 dodge pick-up

Hello Dave,
I own a 1988 Ram 50 5-Standard and will go off my own experiences to answer this question.
I use a synthetic 80W transmission fluid.
If you know what is/was already in there; my recommendation is not to change the grade of oil in the transmission unless it is necessary because of driving conditions or vechicle requirements (i.e. towing/hauling/efficiency).
Anyway the Ram 50 Manual 4 & 5 Speed transmissions take a range of fluid grades from 70W-90W. You can use this in both conventional and synthetic oils.

For the power steering, universal power steering fluid works the best, and I honestly don't know the exact amount to put in Ram 50, but may I suggest you purchase ~20oz. Fill it half with half the bottle, then check the dipstick, then put in half of that half-bottle (a quarter of the bottle in), check, and repeat until you get it to the appropriate level.

-Cbeach76