Question about GMC C1500

1 Answer

I need an Illustrated Parts Break down for a 1989 GMC Sierra 1500. 350 w/ PS/PB loaded. Steering column Removal Repair or Replace

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • GMC Master
  • 19,396 Answers

Hi.

Below you get all the parts breakdown for GMC Sierra 1500, including steering column assembly:

1500 SIERRA

Here diagrams for all 1989 GMC trucks.

If you need to take apart the steering column you will also need wiring. below the color codes and wiring tips:

GMC SIERRA 1988-2005 VEHICLE WIRING

Regards.

Ginko

Posted on Aug 31, 2011

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

My steering column wires


Donna, steering column wire diagram, check the attached links,instruction and guides, Good luck. "I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
http://alarmsellout.com/support/diagrams/vehicle/GMC%20SIERRA%201988-2005.pdf
Repair Guides Wiring Diagrams Wiring Diagrams AutoZone com
Wiring Diagram
1998 GMC Sierra steering column wiring diagram Google Search

Jul 20, 2016 | 1998 GMC Sierra

1 Answer

99 GMC JIMMY. STEERING LOCKS DOWN SOMETIMES AFTER 1/4 TURN OF STEERING WHEEL. CHANGED PS PUMP, CHANGED STEERING GEAR BOX, CHANGED DRAG LINK, CHANGED BALL JOINTS, NO SIGN OF PHYSICAL BINDING WHAT IS...


Could be steering shaft on bottom of column that connects column to gearbox. Rag joint or u-joints on shaft are dry or seized. Try spraying rubber rag joint & u-joints on steering shaft with a good penetrating oil like PB Blaster. Work steering wheel all the way to left,spray, then turn all the way to right & spray some more.

Mar 21, 2011 | 2000 GMC Sierra

2 Answers

The steering column is loose. It moves about 2 inches up and down and also to the right and left.


sounds like sum1 had the steering wheel off. u need 2 put the spring and c clip back on rite on the steering shaft. its hard 2 do. may need 2 ppl and 2 screwdrivers 2 doit. i can 2 it by myself but its hard

Feb 16, 2010 | 1989 GMC Sierra

1 Answer

Hi/lo beam not on at the same time


replace the high/low beam switch on the bottom of the steering column, there is a rod going to it from the lever up top.

Oct 13, 2009 | 1989 GMC Sierra

1 Answer

We have bled the lines on a 1994 gmc sierra and are getting no tension in the clutch what do we do?


From your comments, your clutch master is no longer
working. Check your clutch master, and replace all the
worn out parts. You can buy all of these in one pack,
specify Clutch Master Repair Kit for 1989 GMC Sierra.

Oct 05, 2009 | 1989 GMC Sierra

1 Answer

On a 2003 GMC Sierra Durmax truck there is a clunking noise in the steering column or shaft when you drive down the road


There is a known problem in the intermediate shaft on these trucks.If you look under the hood on the right side of engine compartment,you will see the intermediate shaft connects to steering column and runs to the steering gear.

Aug 03, 2009 | 2003 GMC Sierra 2500HD

3 Answers

1989 GMC Sierra 3500 loose tilt steering column


Watch videos on youtube ( repairing loose tilt wheel)

Jul 19, 2009 | GMC Sierra 1500 Cars & Trucks

1 Answer

Replace a steering column on 1989 chevy k5 blazer


The best thing to do is to buy a Chilton,s repair manual. It has step by step procedures. You can get one at most auto parts stores. They coast anywhere from $10-$30 dollars.

Mar 16, 2009 | 1989 Chevrolet S-10 Blazer

1 Answer

94 GMC Sierra 4.3 L Manual "Steering Column"


just replace the whole colmn 100.00 at junk yard and about an hours work a lot eaiser than trying too replace all those parts

Feb 09, 2009 | 1994 GMC Sierra

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

2,317 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

Marvin
Marvin

Level 3 Expert

85222 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...