At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
The 2003 Mazda Protege LX does not have an inline fuel filter. Instead, it has a "strainer" or a "screen" that looks like a nylon mesh "sock". This strainer is connected to the fuel pump, which is located in the gas tank. The fuel filter is always found between the fuel tank and the engine, and for most vehicles, it is located inside the top of the fuel tank, right where it connects with the fuel line .
The fuel filter for your vehicle is located on the Fuel Pump Unit, which is located in the vehicle fuel tank. The Fuel Pump Unit must be removed from the top of the fuel tank in order to replace the Fuel Filter.
For 1996 Mazda 626 2.5L MFI DOHC
6cylthe Fuel Filter is located under hood, driver side, engine side of strut tower,
below air filter housing, mounted in fuel line.
The fuel filter is located on the right hand side of the car .It is under a plastic shield just in front of the rear right side wheel .In some cars of mazda 3 the filter on Mazda 3 models is part of the fuel pump assembly. The fuel filter on all Mazda cars can be located on a bracket in the left rear of the engine compartment, next to or beneath the brake master cylinder fluid reservoir or as part of the fuel pump assembly. Tools:
3/8 in. drive ratchet - $7.55
Hose pincher - $4.07
Flare nut wrench - $5.53
Flat Head scredriver - $3.14
Socket Set
Steps: Open the hood and locate the fuel filter. If the fuel filter is not in the engine compartment, follow the fuel line from the tank until the fuel filter is located.Tip: Safety Tip:Always wear safety glasses when working on your vehicle. Wear other personal protective equipment (PPE) when necessary, for example latex gloves or safety shoes.
1. Fuel filter in engine compartment.
2. If the fuel filter has a clear case, inspect the filter element for dirt.
3. If the fuel filter case is not see-through, remove it from the fuel line. Drain the fuel from the filter into a container and inspect the condition of the fuel.
Tip: Caution: Before removing fuel lines or fuel related parts, make sure that the fuel pressure is relieved from the vehicle fuel system. To relieve the pressure in fuel injected systems, remove the fuel pump fuse and run the engine
4. Install the new fuel filter making sure that the flow is in the correct direction. The arrow on the fuel filter is the direction of flow from the tank to the engine.
5. Secure the lines back onto the fuel filter. If applicable, reinstall the fuel pump fuse.
6. Start the engine and check for fuel leaks.
7. Test drive the vehicle to check for a rough running engine, hesitation, or lack of power.
Thanks. Keep updated for any more query. You can rate this
solution and show your appreciation.
A 2001
Mazda
Protege
(actually, all models from 1999-2003 including the DX, LX, ES, Mazdaspeed, and Protege 5)
does not have an inline fuel filter. The only fuel filter it has is a "strainer"
or a "screen", which looks like a nylon mesh "sock". This strainer is
connected to the fuel pump, located in the gas tank. Although this fuel
strainer does not require periodic replacement, it is recommended that
it be changed if you are replacing the fuel pump.
Mazda Car 2005-06 Repair Guide Fuel Filter Removal & Installation
The
fuel filter on most Mazda cars can be located on a bracket in the left
rear of the engine compartment, next to or beneath the brake master
cylinder fluid reservoir or as part of the fuel pump assembly.
The filter on Mazda3 models is part of the fuel pump assembly. The
fuel filter is part of the pump assembly. Once the fuel pump is
removed, remove the filter retainer and filter. refer to the fuel pump
procedure or removal and installation.
Hope helps with this (remember rated this help) Good luck.
The
fuel filter on most Mazda cars can be located on a bracket in the left
rear of the engine compartment, next to or beneath the brake master
cylinder fluid reservoir or as part of the fuel pump assembly.
The filter on Mazda3 models is part of the fuel pump assembly.
The
fuel filter is part of the pump assembly. Once the fuel pump is
removed, remove the filter retainer and filter. refer to the fuel pump
procedure or removal and installation.
×