SOURCE: Fuel Filter
FUEL FILTER REPLACEMENT
1.
Reduce the internal pressure of the fuel pipes and hoses by completing the following operations.
(1)
Disconnect the fuel pump harness after removing the rear seat cushion.
(2)
Start the engine and after it stalls, turn the ignition switch OFF.
(3)
Disconnect the battery negative (-) terminal.
(4)
Connect the fuel pump harness connector
2.
Remove the bolt connecting the fuel line with the fuel filter.
Cover with a shop towel to avoid gasoline from splashing.
3.
Remove the fuel filter mounting bolt, then remove the fuel filter from the fuel filter clamp.
4.
After replacing the fuel filter, check for fuel leaks.
SOURCE: Change the spark plugs on
You have to remove the air intake manifold. The last three are under that. If you dont feel comfortable taking it apart then take it to a dealer.
SOURCE: I need instructions on replacing the timing belt
Which engine? 4 cylinder or V6: Here's procedure for 4 cylinder:
DISASSEMBLY
1.
Remove the alternator belt.
2.
Remove the coolant pump pulley.
3.
Remove the power steering belt and airconditioner belt.
4.
Remove the crankshaft pulley.
5.
Remove the timing belt cover.
6.
Remove the timing belt tensioner pulley.
If the timing belt is reused, make an arrow indicating the turning direction (or the front of the engine) to make sure that the belt is reinstalled in the same direction as before.
7.
Remove the timing belt.
SOURCE: Replace fuel dorr, hyundai tiburon
I recommend you keep screwing with it till you get it right.
195 views
Usually answered in minutes!
×