My a/c blows cold air but doesn't blow very well. I took out the blower motor to see if that was the problem but it was working just fine. The condenser is working because i can feel some cold air come out when i turn my a/c on. The only thing left i can think of is that the vents are clogged somewhere between the fan and where the air actually comes out. Any way to fix my problem?

SOURCE: Blower not blowing

the motor is bad, or there is a fuse blown. check all your fuses, if they are all good then replace the blower motor.

SOURCE: Blower speed question (ac/heater). This just

This is definitely 100% the Blower Motor Resistor.
Replace this and all speeds will work fine.
This Resistor is defined with 3 to 4 wires going into it, and is located adjacent to the Blower Motor.
It is easily access, removed and replaced.
I will post an additional comment on Part Number, Price and where available.
Let me know if this helped, or if you have additional information or questions. Feel free to contact me at FixYa.com!

Testimonial: "thank you so much!!!"

SOURCE: I have an 01 Jeep Grand Cherokee. When you turn

behind the center counsel between the floor and the heater housing is a part that is called the blend door actuator. these usually go bad and have to be replaced.

SOURCE: blowes air throught defrost vents only

its a problem with the switching mechanism. you have to look up under the dash to see if you can see where the switching mechanism is. if you can not see it from there youll have to remove complete center dash

SOURCE: 2002 Jeep Liberty - Air conditioner not blowing.

OK. So the blower notor isn't operating. Do you have power to the blower motor? The resistor is new from what I got. If you don't have power to the blower motor, then check the speed control switch and fuses. If you have power at the blower motor, replace the blower motor