Simplest water pump ever made. Simply remove the air filter housing from the engine. Should be 2 bolts that hold it on and a hose clamp on the intake hose. Then remove the serpentine belt from the water pump pulley. Achieve this by using a wrench to release tension off the tensioner pulley which is located below the water pump. Then there are 1 bolt on either side of the water pump shaft. then just simply pull it out. You may need to use a piece of wood and a hammer to tap it loose but it should come out easy. And install is the reverse. This engine has a O-ring instead of a gasket, put a little oil on the O-ring before installing. water pump install for 2004.5 325 HP 6 series Cummins. look on the driver side of valve covers to verify which model you have. 04 says 305HP 04.5 says 325HP
290 views
Usually answered in minutes!
its only 2 bolts and your done
×