Question about Ford Escort

1 Answer

Cant select gears in my escort gti, the thrust bearing is winding

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ford Master
  • 5,763 Answers

This sounds like the throwout breaing is going or gone bad and may have lost it purpose of controling the pressure plate, by not being able to select a gear tells me something has gone bad in the clutch system like the bearing which pushes the pressure plate to release the cluch which allow ****** to stop spinning so that the gear can be selected. the repair for this would be to replace the clutch kit. the clutch pack will come with new bearing clutch disc and pressure plate and if needed a polit bushing, the whining noise was a warning that something in the cluch system was going bad.

Posted on Sep 25, 2011

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

After putting in a clutch, main tranny shaft bearing and counter shaft bearing, truck is back together and stuck in a high gear


Make sure you replace the thrust bearings (shims) as otherwise it will not select the correct gear or jam and select 1st and 3rd at the same time!.

Mar 08, 2014 | 1997 Nissan Pickup

1 Answer

Do you losen the cluch on a ford escort then tighten it when it is sliping


hi all clutchs need a certain amount of free play otherwise u load up the thrust bearing and do damage to fingers in the pressure plate so if u have no free play uneed 2 slacken off the cable if u have trouble selecting gears or have slippage chances are u need a new clutch kit hope this helps

Sep 13, 2011 | Ford Escort Cars & Trucks

1 Answer

My escort gti 98 is making a noise like a dry bearing round the top cams, only when engine is hot. help!!


Remove valve cover and to see if it look oily if it does more then likely that's not the noise. I would remove the upper timing belt cover and check the timing belt idler pulley bearing.

Nov 25, 2009 | 1996 Ford Escort 4 Door

1 Answer

Noisey thrust bearing


all transmisions must be removed to remove thrust bearing there is no way around it its a ring bearing around a shaft that goes thru the cluch into the flywheel!

Aug 29, 2009 | 2004 Nissan Armada

2 Answers

Need a drawing of the worm shaft and spool valve assy.


closest I have is 94 explorer. may be similar.

d097a7d.gif
058382f.gif
0eb9efd.gif
Item Part Number Description 1 3E501 Steering Gear Sector Shaft Seal 2 3524 Steering Gear Input Worm Gear and Rack 3 3647 Steering Gear Worm Ball 4 3523 Steering Gear Ball Return Guide 5 3A670 Steering Gear Worm Thrust Bearing Adjuster 6 — Locknut (Part of 3577) 7 3571 Steering Gear Worm Thrust Bearing 8 3575 Steering Gear Sector Shaft 9 3524 Steering Gear Input Worm Gear and Rack

May 09, 2009 | 1983 Ford F 250

2 Answers

Gear shifting problem. We canged the clutch,


well if the clutch is fine and your box is fine.. then its most likely your gear linkage.. these are adjustable... the linkages are also very bad for siezing up...

Apr 30, 2009 | 2008 Volkswagen Gti

1 Answer

How easy is it to replace a noisy clutch thrust bearing. 53 plate Ford Focus 1.6 petrol zetec.


The thrust bearing is normally a part of a new clutch kit.Comprises pressure plate, clutch plate and thrust bearing.You will need to remove the gear box to change the bearing.The bearing basically slides onto the gearbox shaft. Recommend changing all three rather than just the beaing.You may want to get quotes from garages as dealers are expensive.

Mar 08, 2009 | 2003 Ford Focus

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

172 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

Marvin
Marvin

Level 3 Expert

85222 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

gerry bissi

Level 3 Expert

4388 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...