SOURCE: Front Hub Bearing Torque specs to complete replacement
THE LUG NUT TORQUE SPEC - 140FT/LBS\
CALIPER MOUNT - 80FT/LBS
CALIPER BRACKET 129FT/LBS
AXLE NUT 177FT/LBS
SOURCE: 2005 Grand Caravan Brake Job
Better late than never, right?
According to Haynes 30013: "Dodge Carvan, Chrysler Voyager & Town and Country, 2003 through 2006" Repair Manual:
Caliper Guide Pins or Guide Pin Bolts - 26 Ft-lbs
SOURCE: front spindle caliper mount holes stripped,any fixes
there is a thread repair kit that you can get out of advance auto for about $40, but your better off replacing the spindle.
SOURCE: torque settings
Torque Specifications Description Nm lb-ft Brake caliper retaining bolts 28 21 Brake hose to brake caliper union 15 11 Brake caliper anchor plate retaining bolts — 2.0L Duratec ST 133 98
SOURCE: Front caliper securing bolts torque
I know that it's a jag, and I know you are trying to be perfect, but in over thirty years, I've never seen a tech put a torque wrench on a caliper bolt. If you really want to I'd use about 35-40 foot pounds. (I go by bolt diameter) You don't have to slam them down but you don't want them to back out either. A bit over 35 is reasonable and should not damage anything and will keep them secure!
I have no idea what nm conversion is..
2,434 views
Usually answered in minutes!
×